Craftsman CMXGMAM211201 Questions & Answers

You can find answers or submit your question.

In ManualsFile, you can ask and answer questions about your issues. We - volunteers - or other people who own the product will help you.

You should also read the documentation for your own answers. Download documentation for this product here.

16 Questions

  • User Non avatarFrustrated5 days ago

    All I want to do is change the oil. I have the operators manual and separate warranty document. Under both it refers me to the engine operators manual. I do not have that manual and went directly to the craftsman website entered the cm# and engine operators manual. They referred me back to the owner manual. All I want to know is how to drain the engine oil Thanks

  • User Non avatar #154833 United States1 month ago

    My lawnmower won't start. I have replaced the spark plug. It acts like it's not getting any gas.

  • Where is the spark plug?

  • User Non avatar #105288 MX2 years ago

    The Craftsman spark plug is located in the front part right side of the lawnmower engine. 

  • I just bought my new lawn mower, and the self-propel doesn't work. I tried to adjust it, and it won't let me do anything. Can you help please. Thanks

  • User Non avatar #102260 Asia3 years ago

    You may need to make an adjustment on your self-propel cable. You can find the directions on how to do this in User Manual.

    https://manualsfile.com/product/pdgrv0wqxg.html#adjustments
     

  • Cannot pull starting cord out. I looked at blade and I see that it is hitting on bar that has to be slid out. How do I slide the bar out?

  • User Non avatar #102261 Asia3 years ago

    If you have added gas and oil please do not tilt. Remove the 2 knobs located on the handle rods on each side of the mower (just above the wheels) lift the rods and locate the hole closest to the ground and and place knobs back in. This will lift the rods that are preventing the blades from spinning. 

  • User Non avatarBinder dri3 years ago

    what motor oil do you use 30Wt. or 10-30

  • User Non avatar #102262 Asia3 years ago

    Please use a 10w-30 oil weight.

  • User Non avatarCharlene3 years ago

    Put handle down to store now can’t unfold back up model 12A-A26b793 rope won’t let unfold handle

  • User Non avatarTodd Chris4 years ago

    What is the green quick start for how does it work

  • User Non avatar #44936 United States4 years ago

    MY CABLE FOR THE SELF PROPELLED IS LOOSE

  • User Non avatar #44160 United States4 years ago

    Cannot pull starting cord out. I looked at blade and I see that it is hitting on bar that has to be slid out. How do I slide the bar out?

    1 like
  • having the same problem. how do you remove the bars from under the mower?

  • How to set it up as a mulcher

  • What level gasoline do I use?

    1 like
  • User Non avatar #105290 United States2 years ago

    The gasoline should be a minimum of 87 octane, and up to 10 percent ethanol(fuel with no ethanol best).

  • How to adjust the handle height on the m220 lawnmower for a person 5’2” tall?

  • How to adjust the handle height on the m220? I am 5’2” tall?

  • Cannot get pull cord to relase more than a few inches from the reel. What do I need to do?

  • User Non avatarSHARY L SC4 years ago

    i have a new mower, just unboxed it to get it into the garage last week. i assembled it, everything seemed to be in working condition. today, i wanted to use the mower and the pull rope comes out of the housing about three inches, that is it. then i returns into the housing. what can i do, what did i do?