You can find answers or submit your question.
In ManualsFile, you can ask and answer questions about your issues. We - volunteers - or other people who own the product will help you.
You should also read the documentation for your own answers. Download documentation for this product here.
WHRN VAC IS TURNED ON ITRUNS THEN SHUTS OFF AND ALL LIGHTS FLASH
We would suggest putting the battery on the charger overnight and see if that changes anything. If problem persists, it may be possible that your battery is defective. In order to better assist you and help provide a replacement battery if it is indeed defective, please contact Hoover directly at [email protected].
How do you remove the handle once it’s has been attached?
This unit's handle can be removed by pressing in on the circle located where the handle meets the body of the unit.
when the vacuum is turned on ; it only runs for about 10 seconds and then shuts down ; then the hand floor- carpet-and brush off lights start to flash at the same time for about 8 seconds ; what is the problem ? I replace battery and the issue persist.
In order to best assist you, please contact Hoover directly at [email protected] with reference to this review and model number.
I'm looking for the wire diagram
when the vacuum is turned on ; it only runs for about 10 seconds and then shuts down ; then the hand floor- carpet-and brush off lights start to flash at the same time for about 8 seconds ; what is the problem ?
If you have any questions about this product, please ask here.