GE - General Electric AHQ06LZ Questions & Answers
You can find answers or submit your question.
In ManualsFile, you can ask and answer questions about your issues. We - volunteers - or other people who own the product will help you.
You should also read the documentation for your own answers. Download documentation for this product here.
9 Questions
How do you remove the front of ac to clean coils?
This unit has a front cover that can be removed for cleaning or maintenance. To remove the front cover, first make sure that the unit is unplugged and the power is off.
Next, locate the two screws on the top of the unit near the grille. Use a screwdriver to remove these screws and set them aside. With the screws removed, you should be able to gently pull off the front cover.Doesnt seem to turn off when st temp
Check the set temperatures on your thermostat – if the set temperature is lower than the current room temperature, the air conditioner cycle will not stop. Adjust the temperature up a few degrees higher than the current room temperature, which should trigger the thermostat to shut down the air conditioner.
How do i get filter out
To remove the air filter:
- Slide the filter from the left side of the unit. Remove the filter.
- Clean the filter with warm, soapy water. Rinse and let the filter dry before replacing it. Do not clean the filter in a dishwasher.
It doesnt seem to be shutting off when at temp
Check the set temperatures on your thermostat – if the set temperature is lower than the current room temperature, the air conditioner cycle will not stop. Adjust the temperature up a few degrees higher than the current room temperature, which should trigger the thermostat to shut down the air conditioner.
How do I get the filter out to clean it
How do I get the front cover off to clean the mold out of the top where the air comes out?
The reset filter light flashing red. How do I turn it off. Filter has been pulled and cleaned regularly.
The LED light will turn on when the fan has accumulated 250 hours of run time, as a reminder, even though your filter may not be dirty. You simply press the Reset Filter pad to turn off the LED indicator light and reset the accumulated run time.
1 likeHow do I get the filter out. Do I have to unscrew the screw I am lost
How do I get the filter out to clean it
How do you remove the front panel to clean the coils from the front on the inside?
Ask a Question about GE - General Electric AHQ06LZ
If you have any questions about this product, please ask here.
