Whirlpool WMH31017HZ Questions & Answers

You can find answers or submit your question.

In ManualsFile, you can ask and answer questions about your issues. We - volunteers - or other people who own the product will help you.

You should also read the documentation for your own answers. Download documentation for this product here.

17 Questions

  • User Non avatarTonia L Ch2 months ago

    I have purchased a new light bulb and once replaced the light will not com on.

  • User Non avatar #108839 Asia2 months ago

    The Microwave under-counter light used a 40W bulb, part number 8206232.

    To replace the light bulb: the cooktop light is located on the underside of the microwave oven and is replaceable. Remove bulb cover screws and open the bulb cover. Replace bulb, close bulb cover, and secure with screws.

  • Instructions say that I should be able to see the cooking guide label on the front face of my microwave behind the door. Someone forgot to put this sticker on the microwave oven opening. The only thing I see on the front face is on the left side model and serial number. Where can I get a copy of this cooking guide. I am having problems understanding how the defrost works and times associated with melting/softening butter. I am sure the guide would help. I have never had this issue with any whirlpool microwave we have ever had in the past. Usually very straight forward, this one is a mystery without the instructions. Disappointing that the cooking guide is not included in the manual as well. Can someone give me a copy of this guide or post it for all to see.

  • Is there an internal fuse on this unit ?? If so, how do we access it ??

  • User Non avatar #102441 Asia11 months ago

    Microwaves do have a fuse in them and can be checked and changed if blown. Just ensure the microwave is disconnected from the power source and the fuse is pulled before checking it with an ohm meter for continuity. We would not recommend attempting to change a fuse on your own. If you're experiencing issues with your microwave in regards to the power, we would recommend reaching out to Whirlpool customer service.
     

  • Replaced bulbs underneath microwave now it just stays on any suggestions?

  • User Non avatar #99582 United States1 year ago

    Had the same problem with an led bulb. Substituted a regular bulb and that worked correctly.

  • User Non avatar #102442 United States11 months ago

    The cooktop light is located on the underside of the microwave oven and is replaceable. Remove bulb cover screws and open the bulb cover. Replace bulb, close bulb cover, and secure with screws.

  • I have changed the bulb on the underside of the microwave with a bulb from Lowes. Unfortunately, now It just stays on all the time. The light button don’t change from half, full or off. Do you have to rest something?

  • User Non avatarCarolyn1 year ago

    Does my whirlpool microwave oven, model #WMH31017HZ have a light underneath the unit? If so, where is it located?

  • User Non avatar #102443 United States11 months ago

    Yes this model has a light on the bottom to shine on the cooktop. The cooktop light bulb is located on the underside of the microwave oven, and is replaceable.

  • User Non avatar #45435 United States1 year ago

    Does my whirlpool microwave, model #WMH31017HZ have a light bulb underneath the unit for use at night

  • User Non avatar #102444 United States11 months ago

    Yes this model has a light on the bottom to shine on the cooktop. The cooktop light bulb is located on the underside of the microwave oven, and is replaceable.

  • User Non avatarBETTY M LA2 years ago

    I have changed the bulb on the underside of the microwave. Unfortunately, now I cannot turn light off or go from full to half light. The light is permanently on at full light.

  • User Non avatarJoan Storm2 years ago

    How do I use the reheat button on microwave what options are there for dinner plates?

  • User Non avatar #102449 United States11 months ago

    Touch REHEAT, enter number code of food item, enter quantity if needed, then touch the Start control.

  • User Non avatar #22271 United States2 years ago

    The cook top light bulb has burned out. How do I get the bulb out so I can put a new one in?

  • User Non avatar #102447 United States11 months ago

    The cooktop light is located on the underside of the microwave oven and is replaceable. Remove bulb cover screws and open the bulb cover. Replace bulb, close bulb cover, and secure with screws.

  • How do you mute the sounds

  • User Non avatar #102445 United States11 months ago

    You can turn the tones off on this microwave. Programming tones may be turned off, or all tones (including end-of-function signals) may be turned off. To turn off programming tones, touch and hold number keypad “1” for about 3 seconds, until a confirmation tone sounds. Repeat to turn back on programming tones. To turn off all tones, touch and hold number keypad “2” for about 3 seconds, until a confirmation tone sounds. Repeat to turn back on all tones.

  • User Non avatar #14224 United States2 years ago

    To use the defroster how do you set it

  • User Non avatar #102448 United States11 months ago

    Unwrap food. Touch DEFROST, enter number code of food item, enter weight, then touch the Start control. The food codes will scroll when you hit the defrost button.

  • No where can I find a description of the functions and what each button does. How do I set this thing for different foods. A users manual that describes the functions of each button would certainly be helpful

  • User Non avatar #102450 United States11 months ago

    You can find the "Microwave Oven Use" section of the User manual: https://manualsfile.com/download/9nq9fyhij.html

  • User Non avatarScary Sher2 years ago

    I set my microwave for 8 minutes to cook 2 ears of corn.part way through the cycle it quit “humming” but continued to rotate. Corn was not fully cooked. Is there a maximum time for cooking?

  • How do you turn sound back on? I accidentally turned off. Thanks

  • User Non avatar #102451 United States11 months ago

    To turn on programming tones, touch and hold number keypad “1” for about 3 seconds, until a confirmation tone sounds. Repeat to turn back off programming tones. To turn on all tones, touch and hold number keypad “2” for about 3 seconds, until a confirmation tone sounds. Repeat to turn back off all tones.

  • User Non avatar #4399 United States2 years ago

    Turntable doesn’t turn

  • User Non avatar #2969 United States3 years ago

    What lightbulb should I use for a WMH31017HZ?

  • User Non avatar #102446 United States11 months ago

    This is a 40 watt light bulb. The part number is 8206232.