GE - General Electric JVM7195EK4ES Questions & Answers
You can find answers or submit your question.
In ManualsFile, you can ask and answer questions about your issues. We - volunteers - or other people who own the product will help you.
You should also read the documentation for your own answers. Download documentation for this product here.
4 Questions
How do I get the filter light to turn off?
In order to turn off the filter light, press and hold the "Reset Filter" button for three seconds. If this does not correct the situation, disconnect power to the microwave for two to three minutes. This will reset the electronic components and should allow you to turn the filter light off.
can this model be vented externally
The unit will come prepared for external venting. However, this microwaves can be easily converted to re-circulation.
Installation/vent
You can read more about this on page 11 of the installation instructions: https://manualsfile.com/download/4m8s3i4xp/0.html
The light will illuminate after approximately 6 months of alert user to replace the charcoal filter (if used) and clean/replace the grease filters. Reset by pushing and holding button for 3 seconds. Filter Replace Reminder the charcoal/grease filter should be replaced when it is noticeably dirty / discolored(usually after 6-12 months, depending on hood usage) or filter replacement LED is on. When the Filter Replace LED turned on, replace filter and press Reset Filter and hold for 3 seconds to reset.
Ask a Question about GE - General Electric JVM7195EK4ES
If you have any questions about this product, please ask here.
