Loading ...
Loading ...
Loading ...
01 SETTING UP
Setting Up _19
INSTALLING THE WATER LINE
Connecting the water supply line to the refrigerator.
There are several items that you need to purchase to complete this connection.
You may find these items sold as a kit at your local hardware store.
Only connect the water line to a drinkable water source.
If you have to repair or disassemble the water line, cut off 1/4“ of the plastic tubing to make sure you get a snug,
leak-free connection.
1. Slip the compression nut through the supplied plastic tubing .
2. Tighten the compression nut
onto the 1/4” compression fitting.
- If you are using copper tubing, slip the compression nut
(not supplied) and ferrule (not supplied) on
copper tubing (not supplied) as shown.
-
If you are using plastic tubing , insert the molded end(Bulb) of the plastic tubing into the compression fitting.
Do not use without the molded end(Bulb) of the plastic tubing .
3. Tighten the compression nut
onto the compression fitting. Do not over-tighten the compression nut .
4. Turn water on and check for any leakage.
CAUTION
Plastic tubing
(Supplied)
Ferrule
(Not supplied)
Compression nut
(1/4”) (Supplied)
Compression fitting
(Supplied)
Molded end(Bulb)
Compression nut
(1/4”) (Not supplied)
Copper tubing
or
Plastic tubing
(Not supplied) (Not supplied)
Household water supply line
Refrigerator
Use Copper Tubing Use Plastic Tubing
•
¼” copper tubing
•
¼” compression nut (2pc)
•
Ferrule (2pc)
•
¼” plastic tubing
→ Molded end(Bulb)
•
¼” compression nut (2pc)
Loading ...
Loading ...
Loading ...