Loading ...
Loading ...
Loading ...
Instructions
23
ENEN
1.4 General safety instructions
• Do not plug in or unplug with wet hands.
This may cause electric shock or injury.
• Plug the power cord correctly and push it
tight in a wall socket. This may cause
electric shock or fire.
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service
or similarly qualified persons in order to
avoid a hazard. If the power cord is
damaged, it may cause electric shock or
fire.
• Never alter the appliance. Also, do not
disassemble or repair by yourself.
Do not insert fingers, foreign substances
or objects such as pins into gaps or holes
in the body. This may cause a fire,
electric shock or failure. For any
technical support, contact the authorised
local Customer Care Centre.
• In case the power cord breaks or is
damaged or the plug-in part becomes
loose, do not operate it. This may cause
electric shock, fire or injury.
• Do not moisten the body or splash water
on the body. Be careful not to let any
liquids or other substances get into the
switch on the appliance. Do not operate
the switch with wet hands. It may cause
electric shock or fire.
• For your safety, have the grounding
connection perfomed. Make sure that
the grounding is not done on gas pipes,
plastic water pipes, telephone wires, etc.
This may cause electric shock, fire,
malfunction or explosion. Be sure to use
the electrical outlet with ground
connection.
• Never disassemble the chamber set
during operation or insert fingers, foreign
objects such as forks, spoons, etc. into
the hopper chute or juice outlet. This may
cause injuries, accidents or failure.
• Do not operate without locking the
hopper properly. It may cause injury or
failure.
• When detecting a gas leak, do not insert
the power cord into its slot. Open the
window immediately to ventilate fully.
This may cause injury or failure.
• Never put fingers, forks or spoons, etc.
into the juice outlet. This may cause injury
or failure.
• If rotation of the auger is stopped in
normal operation, activate the REVERSE
function and hold for 2-3 seconds and
then after the REVERSE function has
stopped completely, press the ON
button again. If the auger keeps stopping
during operation, the parts may get
damaged and performance may be
affected due to the motor overheating. If
the problem persists, stop the appliance
immediately and contact your local
Customer Care Centre.
Loading ...
Loading ...
Loading ...