Loading ...
Loading ...
Loading ...
7
Important information
Installation Instructions:
The installation of the hood above
gas cooking devices, at a minimum
height of 30” – Fig. 1 – is permitted
provided that the following
nominal heat loads (Hs) are not exceeded:
❑
Gas cooktops
Load of one burner max. 04,5 kW
Load of all burners max. 14,1 kW
❑
Gas glass-ceramic cooktop
The data on nominal heat loads do not
apply to gas glass-ceramic hotplates.
Be sure to observe the instructions
provided by the manufacturer of the
hotplate.
Always turn hood ON when cooking at
high heat.
Burners should not be operated
without an appropriate cooking vessel in
place over the burners.
Your hood has a thermal overload
which will automatically shut off the motor if
it becomes overheated. The motor will
restart when it cools down. If the motor
continues to shut off and restart, please
have the hood serviced.
The smaller the gap between hood and
cooking appliance, the greater the
likelihood that rising steam will cause
condensation to form on the hood.
Suitable for use in residential cooking
area.
Always mount the hood over the center
of the cooking surface.
Distance between cooking surface and
bottom edge of hood. Should be min 30”
(Fig. 1).
Additional notes concerning cooking
appliances:
The relevant regulations and installation
notes provided by the manufacturer of the
gas cooker must be observed in all cases.
The hood may be installed next to only
one full-height cupboard or high wall.
Gap to be at least 2”.
Loading ...
Loading ...
Loading ...