Loading ...
Loading ...
Loading ...
26
OPERATION
Adjusting the Oven Temperature
Your new oven may cook differently from the one
it replaced. Use your new oven for a few weeks to
become more familiar with it before changing the
temperature settings. If after familiarizing yourself with
the new oven, you still think that it is too hot or too
cold, you can adjust the oven temperature yourself.
NOTE
To begin, either raise or lower the thermostat
15 °F (8 °C). Try the oven with the new setting. If
the oven still needs adjustment, raise or lower the
thermostat again, using the first adjustment as a
gauge. For example, if the adjustment was too
much, raise or lower the thermostat 10 °F (5 °C).
If the adjustment was not enough, raise or lower
the thermostat 20 °F (12 °C). Proceed in this way
until the oven is adjusted to your satisfaction.
1
Set the oven mode knob to the Off position.
2
Press and hold Start Time for three seconds
(LSE4617 model only) or press Setting. Then
press Start Time (LSE4617 model only) or
Setting repeatedly until “
” appears in the
display.
3
To increase the temperature, press plus (+) until
the desired amount appears in the display.
To decrease the temperature, press minus (-)
until the desired amount appears in the display.
4
Press Start to accept the change.
NOTE
•
This adjustment does not affect the broiling
or Self Clean temperatures. The adjustment
is retained in memory after a power failure.
The oven temperature can be increased (+) or
decreased (-) as much as 35 °F or 19 °C.
•
Once the temperature is increased or
decreased, the display shows the adjusted
temperature until it readjusts.
Turning the Preheat Alarm Light On/Off
When the oven reaches its set-temperature, the
preheating alarm light flashes 5 times or until the
oven door is opened.
1
Press and hold Start Time for three seconds
(LSE4617 model only) or press Setting. Then
press Start Time (LSE4617 model only) or
Setting repeatedly until “
” appears in the
display.
2
Press plus(+) or minus(-) to turn the light on/off.
3
Press Start to accept the change.
Adjusting the Oven Beeper Volume
1
Set the oven mode knob to the Off position.
2
Press and hold Start Time for three seconds
(LSE4617 model only) or press Setting. Then
press Start Time (LSE4617 model only) or
Setting repeatedly until “
” appears in the
display.
3
Press plus(+) or minus(-) to select the desired
volume.
4
Press Start to accept the change.
Selecting Fahrenheit or Celsius
Set the oven temperature display to show either
Fahrenheit (°F) or Celsius (°C) units. The oven
defaults to Fahrenheit unless changed by the user.
1
Set the oven mode knob to the Off position.
2
Press and hold Start Time for three seconds
(LSE4617 model only) or press Setting. Then
press Start Time (LSE4617 model only) or
Setting repeatedly until “
” appears in the
display.
3
Press plus(+) or minus(-) to select
F(Fahrenheit) or C(Centigrade).
4
Press Start to accept the change.
Turning the Cooktop Beeper On/Off
1
Set the oven mode knob to the Off position
2
Press and hold Start Time for three seconds
(LSE4617 model only) or press Setting. Then
press Start Time (LSE4617 model only) or
Setting repeatedly until “
” appears in the
display.
3
Press plus(+) or minus(-) to turn the beep
on/off.
4
Press Start to accept the change.
Loading ...
Loading ...
Loading ...