Loading ...
Loading ...
Loading ...
6
Using Your Product
Before you use the product for the first time, separate the Jar Lid, Filler Cap
and Blade from the jar. Wash in warm, soapy water or use the top rack in the
dishwasher for smaller parts. Blender jar is safe for bottom rack cleaning. Rinse
and dry well.
Assembly
1. Install the Sealing Ring over the 6 Point Star Blade.
Blade is sharp. Handle with care.
2. Turn the jar upside down so the small opening is at the top.
3. Turn the 6 Point Star Blade with Sealing Ring upside down and place into the
bottom of the jar.
4. Position the open end of the Threaded Jar Bottom Cap over
the jar and Sealing Ring. Turn clockwise to tighten.
Be sure the Threaded Jar Bottom Cap is securely
tightened onto the jar before using.
5. Slide the jar onto the base.
6. Plug the power cord into a standard household
120/127-volt, 60 hz. AC outlet.
Using the Pre-Programmed Settings
1. Press the ON/OFF power button to turn the product on.
The power light will blink, meaning the product is active
and ready to use.
2. Choose a recipe from the recipe section of this
manual or use one of your own.
3. Put the ingredients into the jar.
4. Secure the Filler Cap and Jar Lid.
5. Press one of the two Pre-Programmed Setting buttons
appropriate for your recipe (“Frozen Drinks” or “Food Chop”.)
6. To change your selection, press Stop followed by another Pre-Programmed
Setting button (“Frozen Drinks” or “Food Chop”.)
7. Once the program is finished, the product automatically stops. Please note:
You may press the “Stop” button to cancel the program at any time. The
blinking red light indicates that the blender is ready.
8. Press the ON/OFF power button to turn the product off. This product is
pre-programmed to turn off automatically if not used for a period of several
minutes. All lights will turn off when the unit automatically powers down.
Loading ...
Loading ...
Loading ...