Loading ...
Loading ...
Loading ...
SIDE BURNER ACCESSORY CARE & USE/INSTALLATION
|
13
Installation requires an outdoor 120VAC 15A GFI (Ground Fault
Interrupter) electrical outlet adjacent to the accessory.
The GFI outlet features an internal breaker that reduces shock
hazard. This type of outlet should be installed by a quali ed
electrician either inside the island enclosure for built-in units, or
near the location where a free-standing unit will be used.
For built-in accessories, the supplied 12V transformer is con-
nected to the accessory during installation.
If the electrical system fails to operate, a connection may have
come loose in shipping or the GFI may have tripped, requiring a
reset. See the Troubleshooting section for more details.
CONNECTING THE WIRING
The accessory electrical harnesses are designed to provide
power for both ignition and lighting. While ignition is controlled
at the accessory, lighting is controlled at the grill.
You can control lighting at the accessory by installing the Acces-
sory Light Switch (LASK).
Disconnect the 4-pin connector on the grill and connect those
plugs to the mating plugs on your accessory. (See Index “Electri-
cal Connections)
Important note: If using multiple accessories with the Control
Illumination/Blue LED’S, a connector for this ppurpose is built
into the accessory wiring. This will allow you to use the light
switch on your grill to actuate the power on more than one ac-
cessory.
OPTIONAL ELECTRICAL KITS
Each accessory includes 6 feet of wiring (coiled inside the back of the accessory) to connect the accessory to a Viking Range, LLC grill.
Additionally, 2 specialized electrical kits are available to purchase for your accessory, depending upon how it will be installed. Each
electrical kit ships with an instructional sheet for assembly. Assembly instructions and schematics/drawings can also be found on our
website at www.vikingrange.com.
• LASK Accessory Switch Kit
• LPEK Power Extension Kit
This switch and transformer kit allows independent control of a accessory burner without
connection to a grill. The kit contains a transformer and mounting bracket as well as a
switch assembly with a mounting plate.
The Power Extension Kit provides 12 feet of additional wire between your grill and accessory
burner.
E
LE
C
TRI
C
AL
CO
NNE
C
TI
O
N
S
Loading ...
Loading ...
Loading ...