Loading ...
Loading ...
Loading ...
5. Select a cycle
Efficient dishwashers run longer to save water and energy, just as
driving a car slower saves on gas. Typical cycle time is approximately
2
1
/
2
hours but can take less or more time to complete depending
on selections. Press START to select the Sensor cycle or select
another cycle appropriate for your load (see Cycle Guide).
6. Select options (varies by model)
You can customize your cycles by pressing the options desired. If you
change your mind, press the option again to turn off the option. Not
all options are available for every cycle. If an invalid option is selected
for a given cycle, the lights will flash. Adding options may increase the
cycle time.
7. Start or resume a cycle
NOTE: If needed, run hot water at the sink nearest your dishwasher
until the water is hot. Turn off water.
Push door firmly closed within 4 seconds of pressing Start. If door
is not closed within 4 seconds, the Start button LED will flash, an
audible tone will sound, and the cycle will not start.
IMPORTANT: If the door is opened for any reason after the cycle
is started (even during the Delay option), the Start button must be
pressed again.
Cycle Guide
This information covers several different models. Your dishwasher may not have all of the cycles and options described.
IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the cycle for
the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the cycle will automatically
compensate by adding time, heat, and water as needed.
CYCLES ESTIMATED
WASH TIME
W/O OPTIONS
WATER USAGE
GALLONS
(LITERS)
This is the most versatile cycle. This cycle senses the load size, soil amount,
and toughness of soil to adjust the cycle for improved cleaning, using only the
amount of water and energy needed. The Sensor cycle is automatically selected
if you first press the Start button. Includes Precision Dry +.*
2:30 to 3:30 3.8 to 7.7
(14.4 to 29.3)
Use for hard-to-clean, heavily soiled pots, pans, casseroles, and regular
tableware. Includes Precision Dry +.
2:20 to 3:30 8.4 (31.7)
This cycle is recommended for daily, regular, or typical use to completely wash
and dry a full load of normally soiled dishes. This dishwasher’s government
energy certifications were based on the Normal cycle with only the Precision
Dry + option selected.**
1:50 to 3:30 2.7 to 7.9
(10.4 to 30.0)
Use for lightly soiled items or china and crystal. 1:45 to 3:30 2.7 to 7.9
(10.4 to 30.0)
For fast results, the 1 Hour wash will clean dishes using slightly more water and
energy. For improved drying, select the Precision Dry + option.
NOTE: Some detergents are not recommended for short wash cycles. Please
refer to your detergent packaging for more information.
0:55 to 1:05 6.2 (23.5)
Use for refreshing clean items that may be dusty from infrequent use, or for
rinsing soiled items that will not be washed right away. Do not use detergent.
0:15 to 0:20 2.4 (9.0)
*The government energy certifications are not based on this cycle. See the Normal cycle description for the government energy certification
cycle. Using the Sensor cycle may increase your energy usage.
**No other washing and drying temperature options were selected, and the diswasher was not subjected to truncated testing. Rinse aid was not
used, and there was no detergent used in the prewash.
4
Loading ...
Loading ...
Loading ...