Loading ...
Loading ...
Loading ...
For continuous maximum heating, press the temperature control until
32° C (90° F) is shown in the display window. The DATC will continue
maximum heating (disregarding the displayed temperature) until a
cooler temperature is selected by pressing the temperature control. If
maximum heating is selected, the passenger set point is not displayed
and the passenger temperature adjustments will be disabled.
A change of the driver-selected temperature to a temperature other than
16° C (60° F) or 32° C (90° F) will display the passenger set point. The
passenger side set point will increase or decrease along with the driver
side temperature set point until a change is made using the passenger
temperature control.
Passenger side temperature selection
To control the temperature, select
any temperature between 19°C
(65°F) and 29°C (85°F) by pressing
the temperature control on the
passenger side of the system.
If the driver side temperature
selection is set for maximum cooling
(16°C (60°F)) or maximum heating
(32°C (90°F)), the passenger side
temperature adjustments will be
disabled and the passenger set point will not be displayed.
Temperature conversion
Press the Fahrenheit/Celsius
(°F°C)control to switch between
Fahrenheit and Celsius temperature
on the display only. The
temperature in Celsius will be
displayed in half-degree increments.
The English/Metric control on the
trip computer and message center
(if equipped) will not change the
temperature display. Refer to Electronic message center in the Driver
controls chapter.
A/C
R
F
AUTO
OFF
EXT
F C
C
,
Climate Controls
51
Loading ...
Loading ...
Loading ...