Loading ...
Loading ...
Loading ...
Fluid Ford Part
Name
Application Capacity
Power steering
fluid
Motorcraft
MERCONt ATF
All Fill to MAX line
on reservoir
Engine cooling
fan fluid
Motorcraft
MERCONt ATF
All Fill to MAX line
on reservoir
Rear axle
3
Motorcraft SAE
75W-140 High
Performance
Synthetic Rear
Axle Lubricant
All 1.4L (2.9-3.0
pints)
Fuel tank N/A All 68.2L (18.0
gallons)
Transmission
fluid
4
Motorcraft
MERCONtV
ATF
Automatic
(5R55N)
11.2L (11.9
quarts)
5
Motorcraft
MERCONt ATF
Manual 1.1L (2.3 pints)
6
Windshield
washer fluid
Ultra-Clear
Windshield
Washer
Concentrate
All Fill to line on
reservoir
1
Use only brake fluids certified to meet Ford specifications. Refer to
Lubricant Specifications in this chapter. DOT 3 fluid is recommended.
However, if DOT 3 is not available, DOT 4 fluid can be used.
2
Add the coolant type originally equipped in your vehicle.
3
Your vehicle’s rear axle is filled with a synthetic rear axle lubricant and
is considered lubricated for life. These lubricants do not need to be
checked or changed unless a leak is suspected, service is required or the
axle assembly has been submerged in water. The axle lubricant should
be changed any time the rear axle has been submerged in water. Fill 6
mm to 14 mm (1/4 inch to 9/16 inch) below bottom of fill hole.
4
Ensure the correct automatic transmission fluid is used. MERCONt and
MERCONt V are not interchangeable. DO NOT MIX MERCONt and
MERCONt V. Refer to the scheduled maintenance guide to determine
the correct service interval.
5
Approximate dry capacity, includes cooler and tubes. Fluid level should
be checked by a qualified service technician.
Maintenance and Specifications
262
Loading ...
Loading ...
Loading ...