Loading ...
Loading ...
Loading ...
11
When heating is complete, the message changes
to “Rinsing”.
The appliance is ready for use when an espresso
coee cup appears on the display.
TURNING THE APPLIANCE OFF
Whenever the coee machine is turned o after being used to
make coee, it performs an automatic rinse cycle.
Danger of burns!
During rinsing, a little hot water ows from the coee spouts.
Avoid contact with splashes of water.
Please note:
If you will not be using the appliance for some time, unplug
from the mains socket:
• rstturntheapplianceobypressingthe button
(g. 5);
• placethemainswitchinthe0position(g.6).
Important!
Never place the main switch in the 0 position while the
appliance is on.
MENU SETTINGS
To access the settings menu, press the MENU icon. Scroll through
the menu by pressing the or icon.
To exit the menu, press the ESC icon.
The following can be selected from the menu: Rinsing, Select
background, Descale, Install water lter, Set time, Auto-start,
Auto-o, Energy Saving, Set temperature, Water hardness, Beep,
Default values, Statistics, Set language.
Rinsing
Use this function to deliver hot water from the spout to heat the
internal circuit and make the coee delivered hotter.
Press the OK icon to select the function. Press OK
again to conrm and start rinsing.
After rinsing, the appliance is automatically ready to make the
next drink.
Please note!
During rinsing, a little hot water comes out of the coee spouts
and is collected in the drip tray underneath.
Avoid contact with splashes of water.
Select background
Use this function to change the colour of the display
background.
Press the OK icon to select the function. Press the
or icon to select the required background,
then press OK again to conrm the choice.
Please note!
This menu item can be customised in all proles (see
“Memorising your personal prole” on page 17).
Descale
For instructions on descaling, see page 20.
Install water lter (some models only)
For instructions on the water lter, see page 21.
Set time
To adjust the time on the display, proceed as follows:
Press the OK icon to select the function. Set the
hour using the symbol to increase and the
symbol to decrease, then press OK again to
conrm, then adjust the minutes. Finally press
OK to memorise the time set.
Please note!
Hold the or symbol down to run through the hours and
minutes quickly.
Auto-start
You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coee immediately.
Please note!
• Fortheappliancetocomeonatthesettime, the time
must be set correctly.
• Tosettheauto-starttime,thehourmustrsthavebeen
set.
Press the OK icon to select the function, then
press OK again to conrm.
Adjust the time as described in the previous
section and conrm with OK. The grey symbol
indicates that the function is not active.
Please note!
• When the function is active, the symbol appears
alongside the current time.
• Todisablethefunction,accessthemenuandselectthe
function as described above. “DISABLE?” is displayed.
Press OK to conrm. The symbol alongside the current
Loading ...
Loading ...
Loading ...