Loading ...
Loading ...
Loading ...
Operating24
Operating
3
Radio Operations
Listening to the radio
1. Press F on the remote control or FUNC. on the
unit until FM appears in the display window.
The last received station is tuned in.
2. Auto tuning :
Press and hold TUNING -/+ on the remote
control or C/V on the unit for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
Or
Manual tuning :
Press TUNING -/+ on the remote control or
C/V on the unit repeatedly.
3. Adjust the volume by rotating touch wheel on
the unit or by pressing VOL +/- on the remote
control repeatedly.
Improving poor FM reception
Press d/M on the remote control or unit.
This will change the Tuner from stereo to mono and
usually improve the reception.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure to turn down the volume.
1. Press F on the remote control or FUNC. on the
unit until FM appears in the display window.
2. Select the desired frequency by pressing
TUNING -/+ on the remote control or
C/V on the unit.
3. Press PROGRAM/MEMORY on the remote
control. A preset number will blink in the display
window.
4. Press PRESET/FOLDER W/S on the remote
control to select the preset number you want.
5. Press PROGRAM/MEMORY on the remote
control. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen to a preset station, press
PRESET/FOLDER W/S on the remote control.
Deleting all the saved stations
1. Press and hold PROGRAM/MEMORY on the
remote control for two seconds.
“ERASE ALL?” will flash up on the unit display.
2. Press PROGRAM/MEMORY on the remote
control to erase all the saved radio stations.
Loading ...
Loading ...
Loading ...