Loading ...
Loading ...
Loading ...
95
MAINTENANCE
Rear Gearcase Oil
Always check and change the rear
gearcase oil at the intervals
outlined in the Periodic
Maintenance Chart beginning on
page 84.
Maintain the fluid level at the
bottom of the fill hole threads.
Fluid capacity is 150 ml. Do not
overfill.
The fill plug is located on the rear
of the gearcase. The drain plug is
located on the bottom of the
gearcase.
We recommend the use of POLARIS ATV Angle Drive Fluid (or GL5
80-90 weight gear lube). See page 138 for the part numbers of
POLARIS products.
Oil Check
1. Position the vehicle on a level surface.
2. Remove the fill plug. Check the oil level.
3. Add the recommended oil as needed to bring the level to the bottom
of the fill hole threads. Do not overfill.
4. Reinstall the fill plug. Torque to 19 N-m.
Oil Change
1. Position the vehicle on a level surface.
2. Place a drain pan under the drain hole.
3. Remove the drain plug. Allow the oil to drain completely.
4. Clean and reinstall the drain plug with a new sealing washer. Torque
to 19 N-m.
5. Remove the fill plug. Add 150 ml of the recommended oil. Do not
overfill.
6. Reinstall the fill plug. Torque to 19 N-m.
7. Check for leaks.
8. Dispose of used oil properly.
Drain Plug
Fill Plug
Loading ...
Loading ...
Loading ...