Loading ...
Loading ...
Loading ...
12 13
EN EN
3. Operating and Programming
Install Side Brushes
Attach Side Brushes to the bottom of
DEEBOT by pressing a brush into each slot
with the matching color until it clicks.
2
1
.6
1
.6
Place the Charging Dock on a level floor
surface against the wall with the base
perpendicular to the ground. Keep the
immediate area 1.5m (5’) in front of the
charger and 0.5m (1.6’) on both sides of
the charger clear of objects and reflective
surfaces.
Plug the Charging Dock in.
*
*
The Handheld Vacuum Cleaner immediately starts to charge when the Charging Dock is
plugged in.
Do not change the location of the Charging Dock once DEEBOT has scanned the
environment. If it is necessary to relocate Charging Dock, power OFF DEEBOT and then
power back ON so DEEBOT can re-scan the environment.
Power ON
Open the Top Cover. Move the Power
Switch to the “I” position. The Control Panel
illuminates, DEEBOT plays a musical
tune and the AUTO Mode Button flashes.
DEEBOT is powered ON when the AUTO
Mode Button stays illuminated.
3
Loading ...
Loading ...
Loading ...