Loading ...
Loading ...
Loading ...
8
5. To help with removing odors, you can use a mixture of warm water and baking soda (2 tbs to 1 qt
of water) to wash the interior walls.
6. After cleaning, replace all of the parts that were removed from the appliance.
7. The condenser coils, located on the back or behind the base grille, should also be cleaned
regularly. This may be as often as every other month. Cleaning the condenser coils can help
reduce how much energy the appliance uses. When the condenser coils are dusty or dirty, use a
vacuum cleaner with an extension attachment.
8. After cleaning the appliance, plug in or reconnect power.
NOTE: For CSS Models (completely stainless steel), only use cleaners especially made for stainless
steel.
Changing the Light Bulb (some models only)
NOTE: Not all appliance bulbs will fit your appliance. Be sure to replace the bulb with one of the
same size, shape, base size and wattage. You can purchase bulbs from
www.summitappliance.com/support
1. Unplug appliance or disconnect power.
2. Remove the light shield. Most models do not require tools.
3. Replace the light bulb with an appliance bulb of the same wattage. Replacement LED bulbs are
available from our parts department.
4. Replace the light shield.
5. Plug in appliance or reconnect power.
Loss of Power
In the event of power loss, unplug the appliance. Once power is restored, allow 30 minutes for the
refrigeration system to equalize. During this time, keep the door closed as much as possible.
NOTE: A full appliance stays cold longer than a partially filled one.
Moving the Appliance
1. Remove stored items and tape shelves, drawers and trays in place.
2. Unplug the appliance.
3. Clean it thoroughly.
4. Tape the appliance shut and tape the electrical cord to the cabinet.
When you get the appliance to its new location, refer to the Installation Instructions and Temperature
Selection sections for information on installation and setting the controls.
Loading ...
Loading ...
Loading ...