Loading ...
Loading ...
Loading ...
10
• In all small refrigerators and freezers without interior fans, temperatures are coldest near the
bottom, and occasionally near the rear. Place contents accordingly.
NOTE: For optimum temperature performance, it is recommended that your unit be at least 30% full
during use. If you are only using this unit to store small loads, we recommend adding some
water bottles or freezer packs to ensure temperature stability.
Digital Thermostats (standard on all refrigerators, ACF48W models, and
VT65MLADA models)
If you find it necessary to change the temperature setting for your digital thermostat, please refer to
the following instructions.
NOTE: The minimum and maximum range of your thermostat is preset and locked so it cannot
easily be accidentally moved outside of the recommended temperature ranges.
To See the Set Point:
The default display for your digital thermostat is the internal cabinet temperature. To view the unit’s
set point, push and immediately release the SET key. The display will flash, showing the set point
value. If no other actions are taken in 6 seconds, the display will revert to the internal air
temperature.
To Change the Set Point:
While the set point value is blinking, press the UP or DOWN arrow to change the set point to your
desired temperature. Press the SET button again to exit the adjustment. The display will revert to the
internal air temperature.
NOTE: The temperature displayed on the digital thermostat is the internal air temperature. Your
alarm/thermometer (installed on the left in the control panel) provides a temperature readout
based on the buffered probe in order to better simulate the temperature of what is actually
stored inside the unit (as opposed to the air temperature itself). As a result, these readings
may not always display the same temperature reading.
Thermometer (PLUS2 Models)
• This digital thermometer simultaneously displays maximum, minimum
and current temperatures. The Max/Min feature monitors and stores the
highest and lowest readings since the battery was inserted or since the
RESET button was last pressed.
• The temperature sensor, or probe, is enclosed in a glycol-filled bottle
that is inserted into the location to be monitored, such as inside a
refrigerator or freezer. The thermometer itself can be attached to the
door of the unit with the magnet on the back, or it can be placed on a convenient table or shelf.
• Power to the Thermometer is supplied with one AAA lithium battery. When it is inserted correctly,
all segments of the LCD display are temporarily activated. When the battery needs to be
replaced, a battery symbol will flash on the display.
Loading ...
Loading ...
Loading ...