Loading ...
Loading ...
Loading ...
Cleaning and maintenance en
9
Run-on function
The run-on function allows the table ventilation to
continue running for a few minutes after it has been
switched off. This eliminates any remaining cooking
smells. The run-on prevents moisture from collecting in
the table ventilation and in the air recirculation in the
cabinet and toe kick. The table ventilation then switches
itself off automatically.
Switching on
Notes
■ If intensive mode has been activated, the run-on
function is not available.
■ The fan flaps must remain closed while the run-on
function is active.
1. Select the fan setting.
2. Press the 9 button.
The 9 indicator will light up.The fan will continue to
run at this setting for 15 minutes and then switch off
automatically once this time has elapsed.
Switching off
Press the # or 9 button.
This will deactivate the run-on function immediately.
Cooking with gas
:Warning – Risk of fire!
Fatty deposits in the grease filter may catch fire. If the
appliance is to be operated next to a gas-fired
appliance, a gas deflector must always be fitted before
you begin cooking.
Note: The gas deflector reduces deflection/disruption
of the gas flames from the burners on the cooktop and
prevents them from being blown out by draughts.
:Warning – Risk of burns!
The appliance will become hot during operation.Allow it
to cool down before touching the fan flaps, gas
deflector and other components.
Note: When the gas deflector is fitted, select intensive
mode or setting 3. This improves the extraction
performance of the worktop-mounted ventilation
system.
Note: When using pans for cooking, use the
appropriate pan lid. If necessary, place the lid on the
pan at a slight angle, with the gap facing the worktop-
mounted ventilation system. This improves the
extraction behaviour of the table ventilation.
2Cleaning and maintenance
Cleaning and maintenance
:Warning – Risk of burns!
The appliance becomes hot during operation. Allow the
appliance to cool down before cleaning.
:Warning – Risk of electric shock!
Penetrating moisture may result in an electric shock.
Clean the appliance using a damp cloth only. Before
cleaning, pull out the mains plug or switch off the circuit
breaker in the fuse box.
:Warning – Risk of electric shock!
Do not use any high-pressure cleaners or steam
cleaners, which can result in an electric shock.
:Warning – Risk of injury!
Components inside the appliance may have sharp
edges. Wear protective gloves.
Cleaning agents
To ensure that the different surfaces are not damaged
by using the wrong cleaning agent, observe the
information in the table. Do not use any of the following:
■ Harsh or abrasive cleaning agents,
■ Cleaning agents with a high alcohol content,
■ Hard scouring pads or cleaning sponges,
■ High-pressure cleaners or steam cleaners.
Wash new sponge cloths thoroughly before use.
Follow all instructions and warnings included with the
cleaning agents.
Area Cleaning agent
Stainless steel Hot soapy water:
Clean with a dish cloth and then dry with a
soft cloth.
Clean stainless steel surfaces in the grind
direction only.
Special stainless steel cleaning products are
available from our after-sales service or from
specialist retailers. Apply a very thin layer of
the cleaning product with a soft cloth.
Painted surfaces Hot soapy water:
Clean using a damp dish cloth and dry with a
soft cloth/towel.
Do not use any stainless steel cleaners.
Aluminium and plastic Glass cleaner:
Clean with a soft cloth.
Loading ...
Loading ...
Loading ...