Loading ...
Loading ...
Loading ...
en Cleaning and maintenance
10
Saturation display
When the metal grease filters or activated charcoal
filters are saturated, the corresponding symbol will light
up:
■ Metal grease filter: 7
■ Activated charcoal filter: 7 and ’
■ Metal grease filter and activated charcoal
filter: 7 and ’
Do not wait any longer to clean the metal grease filters
or replace or regenerate the activated charcoal filters.
Removing and installing the filter
The filter must be serviced regularly in order to
guarantee efficient filtration of odours and grease.
Metal grease filter
The metal grease filters must be cleaned when the
display lights up or at least every two months.
:Warning – Risk of fire!
Grease deposits in the grease filter may catch fire.
Clean the grease filter at least every 2 months.
Never operate the appliance without the grease filter.
:Warning – Damage to the appliance!
Small parts may damage the appliance if they fall into it.
The appliance may only be operated if the metal
grease filter has been inserted and the fan flaps have
been fitted.
Activated charcoal filter (only in circulating-air mode)
The activated charcoal filters must be replaced or
regenerated regularly. The saturation indicator on your
appliance will tell you how frequently this needs to be
done.
Removing metal grease filter
The metal grease filters filter the grease out of kitchen
steam. To keep them in good working order, the filters
should be cleaned at least every two months.
1. Open the fan flaps.
2. Take hold of the metal grease filter with two fingers
at its edge and remove it.
Caution!
Risk of damage when lifting out and setting down
the fan flaps.Pull the metal grease filter straight up to
remove it and make sure that you do not scratch the
surfaces of the appliance.
3. Clean the metal grease filter and filter cover.
Glass Glass cleaner:
Clean with a soft cloth. Do not use a glass
scraper.
Controls Hot soapy water:
Clean using a damp dish cloth and dry with a
soft cloth/towel.
Risk of electric shock caused by penetrating
moisture.
Risk of damage to the electronics from pene-
trating moisture. Never clean operating con-
trols with a wet cloth.
Do not use any stainless steel cleaners.
Area Cleaning agent
Loading ...
Loading ...
Loading ...