Loading ...
Loading ...
Loading ...
REAR SPRING
The rear shock absorber spring is adjusted by rotating the cam either clockwise
or counter-clockwise to increase or decrease spring tension.
q
Cam
w
High Tension
e
Low Tension
HANDLEBARS
The handlebars can be adjusted for rider preference.
WARNING
Improper adjustment of the handlebars or incorrect torquing of the adjuster
block tightening bolts can cause limited steering or loosening of the
handlebars, resulting in loss of control and serious injury or death. Follow the
adjustment procedures exactly, or see your authorized dealer for service.
1. Remove the upper headlight pod (if
equipped).
2. Loosen the four handlebar bolts.
3. Adjust the handlebar to the desired
height. Be sure the handlebars do
not contact the gas tank or any other
part of the machine when turned
fully to the left or right.
4. Torque the front two bolts to 14-17
Nm, then torque the rear two bolts. A
gap of up to 3 mm will remain at the
rear of the clamp blocks.
139
MAINTENANCE
Loading ...
Loading ...
Loading ...