Loading ...
Loading ...
Loading ...
11
12. Align the freezer door in the closed position onto the middle hinge. Place the
upper hinge in position on the left hand side and fix it in place with three screws.
The hole caps will need to be removed prior to the hinge being fixed in place and
put on to the right hand side. You must ensure the freezer door is aligned
horizontally and vertically, so that the seals are closed on all sides before finally
tightening.
13. Replace the hinge cover
Check that the door opens and shuts correctly after you have completed the door
reversal process.
The appliance must now be upright for a minimum of 3 hours before turning it on.
Replacing the Bulb
1. Unplug the appliance from the mains.
2. Locate the lamp cover which is on the rear of the temperature control panel in
the top right hand side of the refrigeration compartment.
3. Using a Phillips head screwdriver remove the screw at the far end of the light
cover and slide the cover off. Please note to unscrew the cover you may have
to remove the food and shelving from the fridge.
4. Replace the bulb with a new one, maximum 10W.
5. Put the lamp cover back on and screw in place.
6. Check the temperature control knob has not been accidentally altered.
7. After 5 minutes, plug the appliance in to the mains.
If you have any problems with this procedure please call the service team on 0345
208 8750.
.
Loading ...
Loading ...
Loading ...