Loading ...
Loading ...
Loading ...
Customer ServiceTroubleshooting Tips
Operating InstructionsSafety Instructions
Installation Instructions
13
Removing the Doors
Unplug the refrigerator from its electrical
outlet.
Empty all door shelves, including the dairy
compartment.
CAUTION: Do not let either door drop to the
floor. To do so could damage the door stop.
b
a
Remove the Fresh Food Door
Remove the top hinge cover (lift up on the
outside edge and pull off).
Tape the door shut with masking tape at both
upper corners.
With 5/16″hex socket driver, remove the 3
screws that hold the top hinge to the cabinet.
Lift the hinge and spacer straight up to free the
hinge pin from the socket in the top of the door.
Remove the tape, tilt the door away from the
cabinet and lift it to free its bottom socket from
the hinge pin on the center hinge bracket.
Set the door on a non-scratching surface.
f
e
d
c
b
a
Remove the Freezer Door
Tape the door shut with masking tape at both
upper corners.
Remove the hinge pin with a 5/16″hex socket
driver.
Remove the tape and tilt the door away from the
cabinet. Remove and save the washer on top of
the door socket.
Lift the door straight up to free its bottom socket
from the pin in the bottom hinge bracket.
If the hinge pin and washer stick in the bottom
door socket, remove them, place the pin in the
outermost hole in the bottom hinge bracket and
slip the washer over the pin.
NOTE:
The hinge rod (on some models) may fall
out of the door. If this happens, set the rod
aside. It will be replaced later.
d
c
b
a
Washer
Washer
Freezer Door
Hinge Pin
Center
Hinge
Bracket
Loading ...
Loading ...
Loading ...