Loading ...
Loading ...
Loading ...
42 OPERATION
Special Functions
Some cycle option buttons also activate secondary
functions. These special functions are marked with an
asterisk (*). Press and hold the option button marked
with the special function to activate it.
* Control Lock
Use this option to prevent unwanted use of the dryer
or to keep cycle settings from being changed while
the dryer is operating.
Press and hold the button marked Control Lock for
3 seconds to activate or deactivate the Control Lock
function. The Control Lock icon will be shown in the
display, and all controls will be disabled except the
POWER button.
NOTE
Once set, Control Lock remains active until it is
manually deactivated. Control Lock must be turned off
to run another cycle. To deactivate Control Lock, press
and hold the
Control Lock
button for 3 seconds.
Energy Saver (on some models)
This option helps to reduce energy consumption in
the Normal cycle, depending on the load size.
When the Energy Saver option is selected, the cycle
begins with an air dry section and the drying time is
increased.
NOTE
The Energy Saver option is turned on by default in
the Normal cycle. Turn off the Energy Saver option
for a faster Normal cycle which begins with heated
drying.
* Default On/Off
This option allows the Energy Saver settings to be
changed. To run a Normal cycle without the Energy
Saver option, press and hold the Energy Saver button
for three seconds. ON or OFF appears in the display.
Rack Dry
Use Rack Dry with items, such as wool sweaters, silk,
and lingerie, that should dry flat. Rack Dry can also
be used with items that should not be tumbled dry,
such as gym shoes or stuffed animals.
Using the Rack Dry cycle:
1
Press and hold the button marked with Rack
Dry for 3 seconds until you hear a beep and the
cycle time appears on the display.
2
Press the Temp. Control button to select
temperature options. If no temperature is
selected, the cycle defaults to no heat.
NOTE
NEVER tumble dry a load of clothing with the
rack installed. When the rack is installed, the
drum will rotate as usual, but the rack will not
move. Make sure all articles to be dried remain
completely on the rack and cannot fall off or be
pulled off by the turning drum. Be sure to remove
the rack after use.
Installing the drying rack:
1
With the dryer door open, slide the rack into the
dryer drum.
2
Make sure it is seated evenly on the edge of the
inner door rim and resting flat on the inside of
the dryer.
Loading ...
Loading ...
Loading ...