Loading ...
Loading ...
Loading ...
10 English
Accessories
For non-vented (recirculating) installation only
NOTE
To reduce the risk of re or shock when the hood is used in recirculation
mode, use only the conversion kit models listed below:
Recirculating kit: NK-AF020FNB/AA
Charcoal Filter Replacement kit: NK-AR040FNB/AA
To attach the recirculation kit, follow these steps:
1. Assemble the air deector with the duct cover bracket with 2 -
assembly screws provided with the Recirculation Kit.
A
B
C
D
A. Vent cover bracket
B. 2.9 x 6.5 mm screws
C. Deector
2. Measure from the bottom of the air deector to the bottom of the
hood outlet.
A
B
C
D
X
E
A. Air deector
B. Vent clamp
C. X = length to cut vent duct
D. Vent duct
E. Exhaust outlet
3. Cut the duct to the measured size (X).
4. Remove the air deector.
5. Slide the duct onto the bottom of the air deector.
6. Place the assembled air deector and duct over the exhaust outlet
from the hood.
7. Re-attach the air deector to the duct cover bracket with 2
assembly screws.
8. Seal the connections with vent clamps
Charcoal lter
The charcoal lter is not washable. It should last up to 6 months
with normal use. Replace with Charcoal Filter Replacement Kit.
To replace charcoal lter:
1. Remove the metal grease lter from the range hood.
2. Bend the spring clips away from the metal grease lter.
3. Place the charcoal lter into the top side of metal lter.
4. Insert the metal grease lter back into the range hood.
Range Hood for ADA Compliance
Range Hood Use and Care
Range Hood Use and Care
Loading ...
Loading ...
Loading ...