Loading ...
Loading ...
Loading ...
35
ELECTRONIC CONTROL SETUP INSTRUCTIONS
Start Operating Set-up
Washer/dryers are preset at the factory and do not require any
programming. However, if you want to change the settings,
follow the “Set-Up Codes” guide.
The rst code shown in each segment is the factory default
setting.
The set-up code is indicated by the one or two left-hand
characters. The set-up code value is indicated by the two
or three right-hand characters.
Code Explanation
6 07 REGULAR CYCLE PRICE (WASHER)
6 07 Represents the number of quarters (coin 1) needed
to start the washer; may adjust from 0–39. (See
VALUE OF COIN 1.) Advance from 0–39 by pressing
the lower-left (HOT) button. Factory default
of 7 quarters = $1.75.
• Press the lower-middle (WARM) button once
to advance to next code.
606 REGULAR CYCLE PRICE (DRYER)
606 Represents the number of quarters (coin 1)
needed to start the dryer; may adjust from 0–39
(See VALUE OF COIN 1). Advance from 0–39 by
pressing the upper-left (COTTON/WHITES) button.
Factory default of 6 quarters = $1.50.
• Press the lower-middle (WARM) button once
to advance to next code.
705 REGULAR DRY TIME (DRYER)
705 Represents the number of minutes per quarter
(coin 1). Factory default of 5 minutes per coin.
Example: 6 quarters x 5 minutes = 30 minutes.
By pressing the upper-left (COTTON/WHITES)
button, value adjusts from 1–99 minutes.
• Press the lower-middle (WARM) button once
to advance to next code.
8 00 ADDITIONAL RINSE OPTION (WASHER)
This option is either NOT SELECTED “00”
or SELECTED “Ar.”
8 00 Not Selected “00.”
8 Ar Selected “Ar.” Cannot be combined with the Super
Cycle rinse option.
• Press the lower-right (COLD) button once to
change this selection.
• Press the lower-middle (WARM) button once
to advance to next code.
800 TYPE OF DRYER PRICING (DRYER)
800 Fixed Cycle with Top Off. For detailed description,
see “General Washer/Dryer User Information.”
8FC With Card Payment System: Fixed Cycle. For
detailed description, see “General Washer/Dryer
User Information.” Use the upper-right (COLORS/
DELICATES) button to change this selection.
• Press the lower-middle (WARM) button once
to advance to next code.
Set-Up Codes
Code Explanation
9 00 CYCLE COUNTER OPTION
This option is either NOT SELECTED “00”
or SELECTED “0C.”
9 00 Not Selected “00.”
9 0C Selected “0C” and not able to be deselected.
• Press the lower-right (COLD) button
3 consecutive times to select “0C.” Once
selected “0C” it cannot be deselected.
• Press the lower-middle (WARM) button once
to advance to next code.
If cycle counter (9 0C) is selected, the following is true:
1 00 Cycles in HUNDREDS 1 02 = 200
2 00 Cycles in ONES 2 25 = 25
TOTAL CYCLES = 225
This is “VIEW ONLY” and cannot be cleared.
• Press the lower-middle (WARM) button once to advance
to next code.
Code Explanation
1. 00 MONEY COUNTER OPTION
This option is either NOT SELECTED “00”
or SELECTED “0C.”
1. 00 Not Selected “00.”
1. 0C Selected “0C.”
• Press the lower-right (COLD) button
3 consecutive times to select “0C” and 3
consecutive times to deselect (Not Selected
“00”). Counter resets by going from “OFF”
to “ON.”
1. C0 Selected “0C” and not able to be deselected.
• To select “C0” and not able to be deselected,
rst select “0C,” then within 2 seconds, press the
lower-middle (WARM) button twice, the lower-left
(HOT) button once, and exit set-up mode.
• Press the lower-middle (WARM) button once to
advance to next code.
2. 00 SPECIAL PRICING OPTIONS
This option is either NOT SELECTED “00”
or SELECTED “SP.”
2. 00 Not Selected “00,” and next available code
will be A.00
2. SP Selected “SP.”
• Press the lower-right (COLD) button once to
change this selection.
If SPECIAL PRICING OPTION is selected, there is access to
codes “3.XX” through “9.XX.”
•Press the lower-middle (WARM) button once to
advance to next code.
If money counter (1.0C or 1.C0) is selected, the
following is true:
3 00 Dollars in HUNDREDS 3 01 = $100.00
4 00 Dollars in ONES 4 68 = $ 68.00
5 00 Number of CENTS 5 75 = $ 00.75
TOTAL = $168.75
Loading ...
Loading ...
Loading ...