Loading ...
Loading ...
Loading ...
72n
Text messages are used to alert the
driver to system malfunctions with the
ignition key in position 2 and higher.
The alert is accompanied by a gong.
1 Status symbol for messages
2 Display
3 CHECK button
Messages concerning system faults are
differentiated based on two priorities:
39mus027
Priority 1
These defects are immediately indi-
cated by a gong and a flashing warning
symbol (1). Simultaneous defects will
be displayed consecutively. These
status messages remain in the display
until the defects are corrected. They
cannot be deleted by pressing the
CHECK button (3):
> "RELEASE PARKING BRAKE"
> "COOLANT TEMPERATURE"
The coolant is overheated. Stop the
vehicle and switch off the engine
immediately. Refer to page 141.
> "STOP! ENGINE OILPRESS"
The oil pressure is too low. Stop the
vehicle and switch off the engine
immediately. Refer to page 139.
> "CHECK BRAKE FLUID"
The level has dropped nearly to the
minimum. Top up the brake fluid at
the next opportunity. Refer to
page 142. Have the source of the
brake fluid loss diagnosed and
corrected by your BMW center.
> "FLAT TIRE"
Reduce vehicle speed immediately
and stop the vehicle. Avoid hard
brake applications. Do not oversteer.
Refer to page 89.
> "LIMIT"
*
This is displayed if the programmed
speed limit has been exceeded.
Check Control
Online Edition for Part No. 01 41 0 155 429 - © 09/00 BMW AG
Loading ...
Loading ...
Loading ...