Loading ...
Loading ...
Loading ...
164n
Repairing a flat tire
3 Flip open the cover and pull out the
enclosed protective gloves. Take out
hose 2 with the pressure gauge and
screw it to the connection on the
sealant container, as shown in the
illustration.
4 Make sure that the system has been
switched off (Position 0). Take out
plug 6 and plug it into the cigarette
lighter socket in the passenger com-
partment (refer to page 110).
39mde107
5 Make sure that the screw on the rear
of the pressure gauge 3 is tightened
down. Turn on the M Mobility System
(position 1, refer to illustration) and
allow 3 minutes to elapse, to let the
sealant flow in. At this point, it is
insignificant what the tire pressure is.
6 Turn off the device.
Disconnect the connector hose from
the sealant container and the tire
valve. Stow the M Mobility System in
the luggage compartment.
39mde108
7 Directly, afterward, drive at least
1.2 miles (2 km), so that the liquid
sealant distributes evenly throughout
the inside of the tire. If possible drive
at no less than 15 mph (20 km/h), but
not more than 40 mph (60 km/h).
Stop in a suitable spot.
Online Edition for Part No. 01 41 0 155 429 - © 09/00 BMW AG
Loading ...
Loading ...
Loading ...