Loading ...
Loading ...
Loading ...
The essentials
Identifying a blown fuse
A f
u
se i
s blown if its metal strip is ruptured
››› Fig. 72.
●
Point a lamp at the fuse to see if it has
blown.
To replace a fuse
●
Remove the fuse.
●
Replace the blown fuse by one with an
identical amperage rating (same colour and
markings) and identical size.
●
Replace the cover again or close the fuse
box lid.
Bulbs
Bulbs (12 V)
Note: D
epending on the level of equipment
fitt
ed in the
vehicle, LEDs may be used for
part or all of the interior and/or exterior light-
ing. LEDs have an estimated life that exceeds
that of the vehicle. If an LED light fails, go to
an authorised workshop for its replacement.
Light source used for each function
Halogen headlights. Type
Dipped beam headlights H7 Long Life
Main beam headlights H7
Halogen headlights. Type
Side light/DRL (daytime running
light)
W21W
Turn signal PY 21W
Halogen headlight with LED
DRL
Type
Dipped beam headlights H7 Long Life
Main beam headlights H7
Turn signal PY 21W
Side light/DRL (daytime running
light)
LED
a)
a)
In case of a LED failure, go to an authorised workshop to have
it replaced.
Full-LED main headlights Type
No bulbs may be replaced. All functions are with LEDs.
In case of a LED failure, go to an authorised workshop to
have it replaced.
Bulb light
a)
Left Right
Brake lights
2 x P21WLL 2 x P21WLL
Side lights
Retro fog light P21 WLL –
Reverse light – P21 WLL
Turn signal PY 21W NA LL PY 21W NA LL
a)
The table corresponds to a right-hand traffic vehicle. The po-
sition of lights may vary according to the country.
Light with
LEDs
a)
Left Right
Brake lights LED LED
Side lights LED LED
Retro fog light LED –
Reverse light – P21 WLL
Turn signal PY 21W NA LL PY 21W NA LL
a)
The table corresponds to a right-hand traffic vehicle. The po-
sition of lights may vary according to the country.
››› page 106
63
Loading ...
Loading ...
Loading ...