Loading ...
Loading ...
Loading ...
Advice
Fill with a refill bottle
On
ly
u
se AdBlue
®
that complies with ISO
22241-1. Only use original containers.
●
Open the tank cover ››› Fig. 236.
●
Unscrew the tank cap by turning it in an an-
ti-clockwise direction.
●
Please observe the manufacturer's instruc-
tions, indicated on the refill bottle.
●
Check the expiry date.
●
Remove the cap of the refill bottle.
●
Insert the neck of the bottle in the tank fill-
er neck vertically and screw the bottle on by
hand, by turning it in a clockwise direction.
●
Press the refill bottle in the direction of the
filler neck and hold it in this position.
●
Wait until the contents of the refill bottle
have been poured into the AdBlue
®
tank. Do
not compress or break the bottle!
●
Turn the bottle in a counter-clockwise direc-
tion and gently pull it upwards ›››
.
●
The AdBlue
®
t
ank
i
s full when no more liq-
uid comes out of the bottle.
●
Screw on the tank cap in a clockwise direc-
tion until it is tightly closed.
●
Close the fuel tank flap.
Operations before driving
●
After refilling the tank, only switch on the
ignition.
●
Leave the ignition on for at least 30 sec-
onds for the system to detect the fluid load.
●
Make sure you wait for at least 30 seconds
before starting the engine!
Refilling the dispenser with AdBlue
Valid for vehicles with selective catalytic re-
duction.
●
Open the tank cap.
●
Turn the SCR tank cap anti-clockwise
››› Fig. 236.
●
Add AdBlue until the nozzle stops for the
first time.
●
Close the SCR tube by turning it clockwise
until you hear a click.
WARNING
AdBlue
®
should on
ly be stored in the original
container, which should be tightly closed and
kept in a safe place.
●
Never keep AdBlue
®
in empty food contain-
ers, bottles or other similar containers. Other
people may confuse it for other products.
●
Keep AdBlue
®
out of the reach of children.
CAUTION
●
When refil
ling, the nozzle grip should be
aligned downward. Otherwise the nozzle will
not connect automatically.
●
Do not try
to add any more additive after
the nozzle has stopped for the first time. The
AdBlue tank could overflow and AdBlue could
spill out.
●
Only use AdBlue
®
that complies with ISO
22241-1. Only use original containers.
●
Never mix AdBlue
®
with water, fuel or addi-
tives. Any type of damage caused by such a
mixture will not be covered by the warranty.
●
Never pour AdBlue
®
into the fuel tank. This
could result in engine damage.
●
Do not carry the refill bottle inside the vehi-
cle. If there is a leak (due to temperature
changes or damage to the bottle), the
AdBlue
®
may damage the vehicle.
For the sake of the environment
Dispose of the refill bottle in an environment-
friendly manner
.
Note
You can buy refill bottles that are adequate
for AdBlue
®
use at
SEAT dealerships.
272
Loading ...
Loading ...
Loading ...