Loading ...
Loading ...
Loading ...
18
19
REFRIGERATOR FEATURES
Your model may have some or all of these features.
To know about glass shelves and covers:
Refrigerator Shelves
The shelves in your refrigerator are adjustable to match
your individual storage needs.
Storing similar food items together in your refrigerator and
adjusting the shelves to t dierent heights of items will
make nding the exact item you want easier. It will also
reduce the amount of time the refrigerator door is open,
and save energy.
IMPORTANT:
• Do not clean glass shelves or covers with warm water
when they are cold. Shelves and covers may break if
exposed to sudden temperature changes or impact, such
as bumping.
• Tempered glass is designed to shatter into many small,
pebble-size pieces. This is normal.
• Glass shelves and covers are heavy. Use both hands
when removing them to avoid dropping.
CAUTION:
To avoid personal injury or property damage.
• Never attempt to adjust a shelf when it is loaded with
food.
• Conrm that shelf is secure prior to loading items onto
it.
Full Width Shelf
Select models are equipped with wire or glass full width
shelves that are supported by rails molded into the interior
walls of the fresh food compartment.
To remove and replace a full width shelf:
1.
Remove food from the shelf.
2.
Grasp each side of the shelf.
3.
Pull the shelf forward approximately 1 inch (25mm).
4.
While supporting the shelf from underneath, lift it up
and out.
5.
Slide the shelf into the desired alternate position.
Half-Width Shelf
One side of the shelf rests on a molded side-wall support;
a bracket on the other side hooks into a track on the rear
cabinet wall.
To remove and replace a half-width shelf:
1.
Remove food from the shelf.
2.
Tilt up the front edge of the shelf.
3.
Lift up the rear of the shelf.
4.
Pull the shelf out of the track.
5.
Move the shelf into the desired alternate position.
6.
While tilting the shelf up, insert the top hook at the
back of the shelf in a slot on the track.
7.
Lower the front of the shelf until the bottom of the shelf
locks into place.
.
Deli Drawer
To remove and replace the deli drawer:
1.
Slide deli drawer out to the stop.
2.
Lift front of deli drawer with one hand while supporting
bottom of drawer with other hand. Slide drawer out the
rest of the way.
3.
Replace the drawer by sliding it back in fully past the
drawer stop.
Tilt up
Tilt up
Loading ...
Loading ...
Loading ...