Loading ...
Loading ...
Loading ...
19
Using your cooktop
Using the burners
1
Choose the control knob for the burner you want to use.
2
Press the knob down gently and turn it anticlockwise to
the
position. The ignitors on all the burners will
spark.
Flame failure models only: Hold down the knob for
approximately 10 seconds after the burner has lit.
Releasing the knob too soon will extinguish the flame.
3
Adjust the flame anywhere between the and
positions. Do not adjust the flame between
and OFF.
Note: If the burner does not light within 15 seconds, turn
the control knob off and wait at least one minute before
trying again.
4
After use, always turn the knobs to the off position. For
models without the flame failure safety feature, you
should also close the cock valve on the gas bottle or the
main gas supply line.
Flame failure safety feature (some models only)
Some cooktop models have a flame failure safety device.
These models have a flame failure probe as well as the
ignitor (see Fig 16).
The flame failure probe cuts off the gas supply to the burner
if the flame is blown out.
When lighting the burner on flame failure models, hold down
the knob for approximately 10 seconds after the burner has lit.
Releasing the knob too soon will extinguish the flame.
If the flames are accidentally extinguished, turn off the burner
and do not try to light it again for at least one minute (to allow the gas to disperse).
Fig. 15a Pushing then turning the con-
trol knob
(models without flame failure
safety feature)
1
2
Fig. 15b Pushing then turning the
control knob
(models with flame failure
safety feature)
Loading ...
Loading ...
Loading ...