Loading ...
Loading ...
Loading ...
Lighting and visibility
150
3008-2_en_Chap04_eclairage-et-visibilite_ed01-2016
Activation
F Turn the lighting control stalk ring to the
"AUTO" position.
Operation
Once the function is activated, the system
operates as follows:
If the ambient light level is sufficient and/or if
the traffic conditions do not allow illumination of
the main beam headlamps:
Pause
If the situation requires a change of headlamp
beam, the driver can take over at any time.
F Flashing the headlamps pauses the
function and the system changes to
"automatic illumination of headlamps"
mode:
- if the "AUTO" and "Dipped beam"
indicator lamps are on, the system
changes to main beam,
- if the "AUTO" and "Main beam" indicator
lamps are on, the system changes to
dipped beam.
To reactivate the system, flash the headlamps
again.
- dipped beam is
maintained, this indicator
lamp comes on in the
instrument panel.
If the ambient light level is very low and the
traffic conditions permit:
- main beam comes
on automatically: this
indicator lamp comes on
in the instrument panel.
Deactivation
The system may suffer interference or
not work correctly:
- under conditions of poor visibility
(falling snow, heavy rain or thick
fog, ...),
- if the windscreen is dirty, misted or
obscured (by a sticker, ...) in front of
the camera,
- if the vehicle is facing highly
reflective signs.
The system is not able to detect:
- road users that do not have their
own lighting, such as pedestrians,
- vehicles whose lighting is obscured
(for example: vehicles running
behind a safety barrier on a
motorway),
- vehicles at the top or bottom of a
steep slope, on twisty roads, on
crossroads.
F In the Driving menu, select
"Driving assistance", then
"Automatic headlamp dip".
F In the Driving menu, select the
"Driving assistance" tab, then
"Automatic headlamp dip"; the
system changes to "automatic
illumination headlamps" mode.
The state of the system stays in memory when
the ignition is switched off.
Loading ...
Loading ...
Loading ...