Loading ...
Loading ...
Loading ...
3. Turn on the parking lights and
check that the new bulb is
working.
4. Put the lens back on the socket
until it locks.
5. Slide the right side of the light
assembly into the hole. Push on
the left side to latch the assembly
into place.
Replacing a High-mount Brake
Light Bulb
1. Open the hatch. Remove the light
assembly cover by pushing in on
the tabs on both sides and pulling
the cover down.
2. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
3. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
4. Press the brake pedal to make
sure the new bulb is working.
SOCKET
BULB
LENS
TABS
COVER
BULB
SOCKET
Lights
208
10/08/06 08:34:41 11 ELEMENT MMC North America Owner's Man 50 31SCV680 enu
Loading ...
Loading ...
Loading ...