Loading ...
Loading ...
Loading ...
Page6 SCEPTRE E20
Do not overload power strips and
extension cords. Overloading can result in
fire or electric shock.
The wall socket should be installed near
the equipment and should be easily
accessible.
Only the marked power source can be
used for the product. Any power source
other than the specified one may cause
fire or electric shock.
Do not touch the power cord during
thunderstorms. To avoid electric shock,
avoid handling the power cord during
electrical storms.
Unplug the unit during a lightning storm or
when it will not be used for a long period of
time. This will protect the E20 LED
MONITOR from damage due to power
surges.
Do not attempt to repair or service the
product yourself. Opening or removing the
back cover may expose you to high
voltages, the risk of electric shock, and
other hazards. If repair is required, please
contact your dealer and refer all servicing
to qualified service personnel.
Keep the product away from moisture. Do
not expose this appliance to rain or
moisture. If water penetrates into the
product, unplug the power cord and
contact your dealer. Continuous use in this
case may result in fire or electric shock.
Do not use the product if any abnormality
occurs. If any smoke or odor becomes
apparent, unplug the power cord and
contact your dealer immediately. Do not try
to repair the product yourself.
Avoid using dropped or damaged
appliances. If the product is dropped
and the housing is damaged, the internal
components may function abnormally.
Unplug the power cord immediately and
contact your dealer for repair. Continued
use of the product may cause fire or
electric shock.
Do not install the product in an area with
heavy dust or high humidity. Operating the
product in environments with heavy dust or
high humidity may cause fire or electric
shock.
Hold the power connector when removing
the power cable. Pulling the power cable
itself may damage the wires inside the
cable and cause fire or electric shocks.
When the product will not be used for an
extended period of time, unplug the power
connector.
To avoid risk of electric shock, do not touch
the connector with wet hands.
If any of the following occurs please
contact the dealer:
o The power connector fails or
frays.
o Liquid sprays or any object
drops into the E20 LED
MONITOR.
o The Display is exposed to rain or
other moisture.
o The Display is dropped or
damaged in any way.
o The performance of the Display
changes substantially.
Operating environment: Temperature: 5°C
~ 35°C, Humidity: 10% to 90%
non-condensing, Altitude: 0~10,000 ft.
Loading ...
Loading ...
Loading ...