Loading ...
Loading ...
Loading ...
Rekeying JāīSeries Knobs
7
STEP #6 - REINSERT THE CYLINDER PLUG
Turn the key to the 3:00 posi-
tion. Push on the follower bar
to reinsert the cylinder plug
into the cylinder body.
Reattach the retaining clip to
the back of the cylinder plug
by pushing it into the groove
until it snaps back into place.
IMPORTANT: Remove key
only when the retaining key is
back in place.
STEP #7 - REASSEMBLE THE KNOB
Line up the cylinder body with
the opening on the backside
of the knob, keyway first.
To place the sleeve into the
backside of the knob, line up
the notched piece on the
sleeve with the opening and
press into place.
A
B
BA
7
Dexter Rekey MR1191.qxd 7/11/06 1:53 PM Page 9
Loading ...
Loading ...
Loading ...