Loading ...
Loading ...
Loading ...
7
Installation and Operation
INSTALLATION OF YOUR APPLIANCE
NOTE: Always place the Ice Cream Maker upright on a flat, level and solid surface.
1. Install the removable stainless steel mixing
bowl. Make sure the outside of the removable
mixing bowl is completely dry before inserting
it to the appliance.
2. Insert the churn blade into the motor axis at
the bottom of the removable stainless steel
mixing bowl. (See picture on right).
3. Install the transparent lid on top of the bowl
and lock it by turning it counterclockwise.
CONTROLS
POWER Button: After the appliance is installed and connected
to the power supply, press the Power button to turn the machine on.
The LCD will display “60:00” which is the factory preset 60 minutes
operating time. When the appliance is on and the Menu Selection
screen is displayed, if the Power button is pressed, the unit will en-
ter Standby mode until the power cord is unplugged.
MENU Button: This unit can be operated in three convenient
modes:
Ice Cream mode - In this mode, the appliance will churn
and freeze. The LCD will display 60:00 minutes as its default oper-
ating time. The desired time can be adjusted by pressing the Timer
buttons before starting this mode. A mixing blade and snowflake
icon will be displayed and flash when ice cream mode is in opera-
tion.
Yogurt mode - In this mode, the appliance will process the
yogurt mixture between 104-110°F(40-43°C) for a default time of 8
hours. The LCD display will show “08H”. The desired time can be
adjusted by pressing the Timer buttons between 04-24 hours before
starting this mode. The yogurt icon will be displayed and flash when
yogurt mode is in operation.
NOTE: Temperature settings can not be adjusted in Yogurt Mode.
Cooling only mode - In this mode, the appliance will freeze
without turning for a default time of 30:00 minutes. The desired time
can be adjusted by pressing the Timer buttons before starting this
mode. A snowflake icon will be displayed when cooling mode is in
operation. This mode is ideal for preventing the frozen ice cream
from melting.
Mixing only mode - In this mode, the churn blade will continue
churning for a default time of 10:00 minutes without cooling. This
mode is ideal for pre-mixing the prepared ingredients and adding
extra ingredients to the finished mixture. The desired time can be
adjusted by pressing the Timer buttons before starting this mode. A
mixing icon will be displayed when Mixing mode is in operation.
NOTE: When the Menu button is pressed down for more than 3 sec-
onds, the ice cream maker will return to setup screen and cancels
the current operation.
Loading ...
Loading ...
Loading ...