Loading ...
Loading ...
Loading ...
49-85237
Removal of Surface Burners for Cleaning
Turn all controls OFF. Allow cooktop to cool before removing grates and burner parts. When removing the burner
caps and heads, remember their size and location. Replace them in the same location after cleaning.
Cleaning The Burners
Burner Caps
Wash burner caps in hot, soapy water and rinse with
clean water. You may scour with a plastic scouring pad
to remove burned-on food particles. The round caps may
also be cleaned in your dishwasher.
Burner Heads
Wash the burner heads routinely, especially after bad
VSLOORYHUVZKLFKFRXOGFORJWKHRSHQLQJV/LIWEXUQHUV
RIIZKHQFRRO8VHKRWVRDS\ZDWHU5LQVHZLWKFOHDQ
ZDWHU)RUPRUHVWXEERUQVWDLQVXVHDEUXVKZLWKSODVWLF
bristles.
NOTE: Do not use steel wool or scouring powders to
clean the burner parts as these may clog the parts.
Never wash burner heads in your dishwasher as
dishwasher detergents will discolor your burners.
The ports in the burner heads must be kept clean at all
times for an even, unhampered flame.
Clogged or dirty burner ports or electrodes will not allow
the burner to operate properly.
)RUSURSHULJQLWLRQPDNHVXUHWKHVPDOOKROHLQWKHQRWFK
that fits over the electrode is kept open. A sewing needle
or wire twist-tie works well to unclog it
After cleaning
%HIRUHSXWWLQJWKHEXUQHUFDSVKHDGVRQVRPHPRGHOV
DQGRYDOKHDGFDSDVVHPEO\EDFNVKDNHRXWH[FHVV
water and allow them to dry thoroughly.
Replacing Burner Heads
Replace burner heads in the correct locations according
to size.
CAUTION
Do not operate the cooktop without
all burner parts and grates in place.
Any spill on or around an electrode must be carefully
cleaned. Take care to not hit an electrode with anything
hard or it could be damaged.
Round hole in
burner head must
be kept clear
Cooktop
CARE AND CLEANING: Cooktop
Loading ...
Loading ...
Loading ...