Loading ...
Loading ...
Loading ...
Page 4
11. Never touch the water or components while the unit is in operation.
12. Do not pour hot water into the tank, i.e. at a temperature in excess of
100°F.
13. Unplug the appliance before cleaning it or removing the tank.
14. Do not immerse the appliance or the power cord in water or other
liquids.
15. Never scrape the transducer with a hard tool. The humidifier must be
cleaned regularly. To do this, refer to the cleaning instructions in this
manual.
16. Do not use any detergents, glass or household cleaner, furniture
polish, gasoline, paint thinner or other solvent to clean any part of the
humidifier.
17. If you spill any liquid into the unit, it can cause serious damage. Switch it
o and unplug immediately.
18. Do not let cord touch any hot surface and make sure that it does not
hang over a table edge or counter.
19. Never use this appliance in a room where aerosol products (sprays) are
used or in a room or where oxygen is being administered.
20. Do not put items of clothing or towels on top of the appliance. If the
nozzle is obstructed, this may cause the appliance to malfunction.
21. When moving the appliance, lift it by the base unit and not by the water
tank.
22. The ideal relative humidity level for human comfort is between 45% and
60%. Excess humidity shows up in the form of condensation on cold
surfaces or cold walls in the room. To measure the room’s humidity, use
a hygrometer available at your local hardware store.
23. Do not use outdoors.
24. Do not place humidifier in an area where it is accessible to children.
Do not use humidifier in a closed room, particularly where a child may
be sleeping, resting, or playing (a closed room may result in excessive
humidity).
25. Do not attempt to refill humidifier without first unplugging the unit from
its electrical outlet. Failure to heed this warning may cause personal
injury. Be sure to unplug the unit by pulling on the plug and not the
cord.
26. This humidifier requires maintenance to operate appropriately. Refer to
cleaning and maintenance procedures. Use only cleaners and additives
recommended by the manufacturer.
SAFETY INFORMATION
Loading ...
Loading ...
Loading ...