Loading ...
Loading ...
Loading ...
GB 31
Building in
Check that the cabinet and the cut-out meet the dimension and
ventilation requirement
Treat the sawn ends of wooden or synthetic worktops with sealing
varnish if necessary, to prevent moisture causing the worktop to swell.
Lay the hob upside down on the worktop.
Fit the connecting cable to the appliance in compliance with the
requirements (see page 29 and 30).
Remove the protective layer from the sealing tape and apply the tape in
the groove of the aluminium profile or on the edge of the glass plate. Do
not stick tape round the corners, but cut 4 separate pieces to seal the
corners well.
Turn the hob over and lay it in the recess.
Connect the appliance to the mains. The displays will light up briefly.
The appliance is ready for use.
Check that it works properly. If the appliance has been wrongly
connected nothing will appear in the displays, depending on the error.
INSTALLATION
Loading ...
Loading ...
Loading ...