Loading ...
Loading ...
Loading ...
5
5. The flashing dot at the bottom right of the display shows that the Memo is working.
HOLIDAYS
If you haven’t used the kettle for a few days:
• empty the kettle and rinse it out
• flush the filter cartridge (see points 10-13)
FILLING
1. Open the lid.
2. Fill with at least 2 cups of water, but not above max.
3. Fill the funnel quickly.
4. Fill it again when it empties.
5. This should fill the kettle to about the max mark.
6. If the water level is above the max mark, pour some water out of the kettle.
7. Close the lid, and press down to lock it.
SWITCHING ON
1. Put the stand on a stable, level surface.
2. Plug the stand into the wall socket.
3. Put the kettle on the stand.
4. Move the switch to I. The light will come on, and the kettle will heat up.
SWITCHING OFF
When the water boils the kettle will switch off and the light will go out.
To switch off manually, move the switch to O.
GENERAL
Note: When you lift your kettle, you may see moisture on the stand. This is normal and is caused
by the steam used to switch your kettle off automatically.
BOIL DRY PROTECTION
If your kettle boils dry, a safety cut-out device will automatically switch it off. If this happens,
unplug your kettle and allow it to cool down until the cut-out resets itself. Allowing your kettle
to boil dry will shorten the life of the element.
CARE AND MAINTENANCE
Unplug the stand, and let the kettle cool before cleaning.
Wipe all surfaces with a clean damp cloth.
THE FUNNEL
1. Open the lid.
2. Put your thumbs inside the funnel.
3. Gently press one thumb against either side of the funnel and lift it out of the kettle.
Loading ...
Loading ...
Loading ...