Loading ...
Loading ...
Loading ...
4
PARTS
1. BRITA® Memo
2. Lid
3. Lid release
4. Handle
5. Switch (O off, I on)
6. Stand
7. Funnel
8. BRITA® MAXTRA+ filter cartridge
9. Screwdriver
10. Notch
BRITA® MAXTRA+ FILTER CARTRIDGE
The filter cartridge contains ion exchange resin and activated carbon.
Reduces limescale and substances, eg. chlorine, that affect taste and odour.
Reducing the impurities makes the water look and taste better, and the reduction in limescale
helps your kettle too.
Remember – water is a food, it goes off. Use filtered water within one day.
BEFORE USING FOR THE FIRST TIME
• Open the lid.
• Remove the filter cartridge from inside the kettle, and jump to step 3 below.
PREPARING THE FILTER CARTRIDGE
You can find more information about BRITA® filter cartridges and the BRITA® Memo in the BRITA®
Information Guide supplied with the kettle.
1. Open the lid.
2. To remove a used filter cartridge, hold the funnel firmly with one hand grip the top of the
filter cartridge with the other hand and pull it up and out.
3. Remove all packaging from the new filter cartridge.
4. Don’t worry if the inside of the packaging is damp – it’s just condensation.
5. There might be black carbon particles in the packaging or on the filter cartridge. Don’t worry,
they’re harmless.
6. To ensure efficient operation, all air must be removed from the filter cartridge.
7. Submerge the filter cartridge in a bowl of cold water and shake it gently till no more bubbles
are released.
8. You may notice some black carbon particles floating in the water. Again, don’t worry, they’re
harmless.
9. Before first use, you must flush the filter cartridge.
10. Push the filter cartridge into the funnel till it won’t go any further.
11. Fill the funnel. Fill it again when it empties. This should fill the kettle to about the max mark.
12. Discard the water, and repeat the operation.
13. When you’ve discarded two lots of water, the filter cartridge is ready for use.
RESET THE BRITA® MEMO
This shows what proportion of the filter cartridge’s 4 week life is left.
1. Press and hold the START button till all 4 bars appear and flash twice, then let go.
2. Every week, one bar will disappear.
3. When all 4 bars disappear, a flashing arrow will appear at the top of the display. This means
it’s time to replace the filter cartridge.
4. When the display gets down to one bar, it’s a good idea to check that you’ve got another
filter cartridge available. If you haven’t, it’s time to buy some.
Loading ...
Loading ...
Loading ...