Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas before servicing. Check appliance is safe when you have nished.
36
ArtNo.281-0148
- USA Oven Fan
ArtNo 281-0149
- USA oven fan element
Fig.9-11
ArtNo.281-0149 - Fan oven inner
Fig.9-10
Remove the two screws holding the small retaining
plate on the back of the cooker and remove the plate.
Remove the pyrolytic phial.
Fit the replacement in reverse order.
4.3 Replacing the oven multi-function switch
Disconnect the cooker from the electricity supply.
Move the cooker away from the wall to allow access to
the rear.
Remove the pan grates and burner heads. Remove the
control panel (see 1.1) and hotplate (see 1.2).
Remove the xing screws from the front of the oven
multi-function switch. Disconnect the leads and
remove the switch.
Fit the new switch.
4.4 Replacing the oven catalytic converter
Disconnect the cooker from the electricity supply.
Undo the 2 screws holding the catalytic lter cover in
place (Fig.9-8) and remove.
Pull out the catalytic assembly.
Replace the catalyst and t in reverse, making sure that
the cover ts over the ends of the thermostat phials.
4.5 Removing an oven inner back panel
Disconnect the cooker from the electricity supply.
Open the oven door. For the right-hand side unscrew
the 4 thermostat phial xing screws.
Remove the xings that secure the inner back to the
oven rear (Fig.9-9). Lift the removable panels away.
Re-assemble in reverse order. Ensure that the retaining
xings are fully tightened.
4.6 Replacing an oven fan
Disconnect the cooker from the electricity supply.
Pull the cooker forward to access the cover boxes at
the rear of the cooker.
Remove the inner back (see 4.5).
Hold the fan blades and undo the centre nut (Left-
hand thread), brass washers, fan blade and circlip
(Fig.9-10). Undo the screws that retain the fan and
remove it from the cavity rear.
Fit the replacement and re-assemble parts in reverse
order.
Check that the oven operates satisfactorily.
4.7 Replacing an oven fan element
Disconnect the cooker from the electricity supply.
Remove the inner back (see 4.5).
Remove the screws that secure the element within the
oven and carefully lift the element away (Fig.9-11).
Disconnect the leads and connect to the replacement
element and re-assemble parts in reverse order.
Fig.9-9
Catalytic
assembly
Filter cover
Fig.9-8
Loading ...
Loading ...
Loading ...