Loading ...
Loading ...
Loading ...
28
Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions
Cook and Hold (on some models)
Your control has a cook and hold feature that
keeps cooked foods warm for up to 3 hours after
Timed Baking or Roasting is finished
NOTE: This feature can only be programmed to
work with Timed Baking or Roasting. (See the
Using the timed baking or roasting features
section.) After Timed Baking or Roasting has
automatically stoped, the programmed cook
and hold will automatically start.
To activate this feature for use after
Timed Baking or Roasting, follow the
steps below.
Touch the BROIL HI/LO and BAKE
pads at the same time for 3 seconds
until the display shows SF.
Touch the COOK TIME pad. The
display will show Hld OFF.
Touch the COOK TIME pad again
to activate the feature. The display
will show Hld ON.
Touch the START pad to activate
the cook and hold feature and
leave the control set in this special
features mode.
NOTE: The control will beep every 6 seconds
if the Cook and Hold feature is set to remind you
that food is in the oven. Touch the CLEAR/OFF
pad and remove food when desired. This
reminder will not work if the tones at the
end of a timed cycle were cancelled. See
the Tones at the End of a Timed Cycle in
this Special Features section.
+
Special features of your oven control.
12-Hour, 24-Hour or Clock Blackout
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour
military time clock or black out the clock
display, follow the steps below.
Touch the BROIL HI/LO and BAKE
pads at the same time for 3 seconds
until the display shows SF.
Touch the CLOCK pad once. The
display will show 12 hr. If this is
the choice you want, touch the
START pad.
Touch the CLOCK pad again to change
to the 24 hour military time clock. The
display will show 24 hr. If this is the choice
you want, touch the START pad.
Touch the CLOCK pad again to black out
the clock display. The display will show
OFF. If this is the choice you want, touch
the START pad.
NOTE: If the clock is in the black-out mode you
will not be able to use the Delay Start function.
+
Tone Volume (on some models)
This feature allows you to adjust the tone
volumes to a more acceptable volume. There are
three possible volume levels.
Touch the BROIL HI/LO and BAKE
pads at the same time for 3 seconds,
until the display shows SF.
Touch the OVEN LIGHT ON/OFF pad.
The display will show 2 BEEP. This is
the high volume level.
Touch the OVEN LIGHT ON/OFF pad
again. The display will show 3 BEEP.
This is the loudest volume level.
Touch the OVEN LIGHT ON/OFF pad
again. The display will show 1 BEEP.
This is the quietest volume level.
For each time the level is changed,
a tone will sound to provide an
indication of the volume level.
Choose the desired sound level
(1 BEEP, 2 BEEP, 3 BEEP).
Touch the START pad to activate the
level shown.
+
Loading ...
Loading ...
Loading ...