Loading ...
Loading ...
Loading ...
en Faults and what to do about them.
60
Information on the display panel
Display Cause/remedy
Re-fill the i-DOS iIw, w
dispenser
The i-DOS dispensers are below the minimum fill level; top up ~ Page 48.
i-DOS iIw, i-DOS w
error;
deactivate i-DOS iIw,
i-DOS w
set i-DOS iIw, i-DOS w to off.
Call the after-sales service. The appliance can still be operated using manual
dosing. Manual dosing ~ Page 51
Please close detergent
drawer
Push the detergent drawer in correctly. ~ Page 49
Pause: Reload is not
possible
Water level or temperature is too high. Press the A button to continue the
programme.
Door cannot be
unlocked: Water level or
temperature is too high
Water level or temperature is too high. Press the A button to continue the
programme.
The door cannot be
locked; please open the
door again, then close it
and select the A
button
■ Laundry may be caught. Open and close the door again and press the A
button.
■ If necessary, push the door closed or remove some laundry and then push
it closed again.
■ If necessary, switch the appliance off and on again; set the programme and
make your individual settings; start the programme.
Please open tap ■ Turn on the tap fully,
■ Supply hose kinked/trapped,
■ The water pressure is too low. Clean the filter. ~ Page 58
Please clean pump ■ The drain pump is blocked. Clean the drain pump. ~ Page 57
■ The drain hose/drain pipe is blocked. Clean the drain hose at the siphon.
~ Page 58
AquaStop has been
activated! Please call the
after-sales service
Does not occur for models without AquaStop
There is water in the base trough; the appliance is leaking. Turn off the tap. Call
the after-sales service.
Auto power-off in ...
seconds
Appliance automatically switches off after ... seconds if it is not operated for a
prolonged period. To cancel, press any button. ~ Page 53
Water cooling To protect the wastewater pipes, the hot detergent solution is cooled before
being drained.
Loading ...
Loading ...
Loading ...