Loading ...
Loading ...
Loading ...
Using the Menu Functions
15
●
To reset the levels of each frequency to the default
settings, select [Reset to Defaults] by using the cursor
button, and then press the OK button.
[Balance]
Adjusts volume level of right and left speakers.
[Surround]
Surround sound settings. [Off] / [On]
[Auto Gain Control]
Automatically regulates large sound level differences
between channels and inputs. [Off] / [On]
[Volume Correction]
Adjusts the volume of individual channel or input mode.
[Speaker Distance to Wall]
Compensates for the low frequency sound due to the
distance between the speakers and the wall.
[Over 30cm] / [Up to 30cm]
●
If the distance between the TV and wall is over 30 cm,
[Over 30cm] is recommended.
●
If the distance between the TV and wall is within
30 cm, [Up to 30cm] is recommended.
[Preferred Audio 1]
Selects the preferred language for Digital TV multi audio
(depending on the broadcaster).
[MPX]
Selects multiplex sound mode (if available).
[Stereo]: Use this normally.
[Mono]: When stereo signal cannot be received.
[M1] / [M2]: Available while mono signal is transmitted.
●
For Analogue TV only.
[SPDIF Selection]
SPDIF: A standard audio file transfer format.
Selects the initial setting for digital audio output signal
from DIGITAL AUDIO OUT and HDMI 2 (ARC function)
terminals. [Auto] / [PCM]
[Auto]: Dolby Digital is output as Dolby Digital
Bitstream. HE-AAC and MPEG are output as PCM.
[PCM]: Digital output signal is fixed to PCM.
●
For Digital TV or video contents of Media Player.
[MPEG Optical Level]
Adjusts the audio level output from DIGITAL AUDIO
OUT terminal as the initial setting.
[-12 / -10 / -8 / -6 / -4 / -2 / 0 dB]
●
Normally, PCM sound is higher comparing with the
other types of audio track.
[HDMI 1/2 Input(HDMI)]
Selects to fit the input signal (p. 20).
[Digital] / [Analogue]
[Digital]: When sound is carried via the HDMI cable
connection.
[Analogue]: When sound is not carried via the HDMI-
DVI adaptor cable connection.
●
For HDMI input only.
[SPDIF Delay]
Adjusts the time delay for the sound output from
DIGITAL AUDIO OUT or HDMI 2 (ARC function)
terminals if the sound does not synchronise with the
image. [0] / [10] / [20 to 200] (msec)
[Downmix Mode]
Selects the output mode for listening to compressed
music. [Surround] / [Stereo] / [Dual1] / [ Dual2]
●
Not available in Analogue TV mode.
[Type]
Narration settings for impaired users (only available
in some countries). [Normal] / [Hearing Impaired] /
[Visually Impaired]
[Hearing Impaired]: Provides aids in understanding
and enjoyment with Digital TV subtitles (depending on
the broadcaster).
[Visually Impaired]
: Activates the narration sound
track when available on the broadcast.
●
For Digital TV only.
[Visually Impaired] (below) is available after you have
selected this option.
[Visually Impaired]
■ [Speaker]
Narration sound track is output to the TV speakers.
[Off] / [On]
■ [Volume]
Adjusts the volume of the narration sound track.
■ [Pan and Fade]
Sets the audio pan and fade effect. [Off] / [On]
[Off]: Main Audio program.
[On]: Controls the level of the Main Audio Program
and the pan of the Associated Audio Program.
[Reset to Defaults]
Resets the current sound settings to defaults.
Timer
[Off Timer]
Sets the duration until the TV automatically goes to
Standby mode.
[Off] / [15 / 30 / 45 / 60 / 75 / 90 minutes]
[Auto Standby]
Enables the TV to turn into Standby mode automatically
if no operation is performed after the selected period.
[Off] / [2 hours] / [4 hours]
●
Automatic input switching with the connected
equipment affects this function and time-count will be
reset.
[Region Selection]
Selects the region where you live to adjust the standard
time. [NSW/ACT] / [Victoria] / [Queensland] /
[South Australia] / [Western Australia] / [Northern
Territory] / [Tasmania]
[Daylight Saving]
Selects the time offset from the standard time for
Summer. [Auto] / [Off] / [1/2 hour] / [1 hour]
TH-32F400AZ_EN-1.indd 15TH-32F400AZ_EN-1.indd 15 2/1/2018 1:21:09 PM2/1/2018 1:21:09 PM
Loading ...
Loading ...
Loading ...