Loading ...
Loading ...
Loading ...
English 47
Troubleshooting
Symptom Action
Lint on clothes
• Make sure the lint lter is clean before every load.
• Dry lint-producing items (fuzzy towels) separate from lint
trappers, such as black linen pants.
• Divide larger loads into smaller loads.
Items still wrinkled
after Wrinkle Prevent
• Small loads of 1-4 items work best.
• Load fewer items. Load similar type items.
Odors remain in items
after Cool Air
• Make sure to thoroughly wash items with strong odors.
Information codes
If the dryer fails to operate, you may see an information code on the display. Check the
table below and try the suggestions.
Information code Meaning Action
tC Air temperature sensor issue
Clean the lint lter and/or heat
exchanger lter. If this continues, call
for service.
tC5
Compressor temperature
sensor issue
Wait 2-3 minutes. Turn the power on
and restart.
dC
Running the dryer with door
open
Close the door and restart.
If this continues, call for service.
HC Compressor overheat Call for service.
9C2 Low voltage detected
Check if the power cord is plugged
in. If this continues, call for service.
5C
Water tank full
Drain pump is out of order
Empty the water tank, turn the
power on, and restart. If this
continues, call for service.
For any codes not listed above, or if the information code continues to appear, call for
service.
Untitled-2 47 11/30/2018 5:58:47 PM
Loading ...
Loading ...
Loading ...