Loading ...
Loading ...
Loading ...
En
9
Additional information
Troubleshooting
! Sometimes the problem may lie in another component. Inspect the other components and electrical appliances being used. If the problem cannot
be rectified, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.
! This unit may not operate properly due to static electricity or other external factors. In this case, normal operation may be restored by unplugging
the power cord, waiting about 5 seconds or more, then plugging the power cord back in.
Common
Problem Check Remedy
The power is not turned on. Is the power cord properly connected? Plug in the power cord to an AC outlet.
No sound is output from the connected
device or the sound is low.
Is the connected device set properly? Set the device external input and volume properly.
Is the volume set to the proper position?
Turn the [LEVEL] control on the front panel of this unit clockwise to increase
the volume.
Is the power turned on? Turn on the [POWER] switch on the rear panel of this unit.
The POWER indicator (white) does not
light.
Is the power turned on? Turn on the [POWER] switch on the rear panel of this unit.
Are the speakers in the standby state?
Turn off the [POWER] switch on the rear panel of this unit once and then turn
it back on after a few seconds. Or press the pairing button on the front panel
of this unit.
This unit does not recover (power-on)
from the standby state.
Is the input signal level low? Increase the input signal level.
Distorted sound.
Is the volume set to the proper position?
Turn the [LEVEL] control on the front panel of this unit counterclockwise to
reduce the volume.
Is the level for input from the connected device
appropriate?
Adjust the output level of the connected device properly.
Oscillates (loud sound is output
continuously).
Is the volume set to the proper position?
Turn the [LEVEL] control on the front panel of this unit counterclockwise to
reduce the volume.
Sound is only output from the left
speaker.
Is the speaker cord connected properly? Connect the left and right speakers properly.
The power turns off (standby state)
automatically.
Did a state of no sound continue for a set time
(approximately 30 minutes) or longer?
Input a signal from the RCA or stereo mini plug input terminal.
Or press the pairing button on the front panel of this unit.
Is the input signal level low? Increase the input signal level.
When connected to INPUT 1 or INPUT 2 terminals
Problem Check Remedy
No sound is output from the connected
device or the sound is low.
Are the connection cables properly connected? Connect the connection cables properly.
Are the terminals and plugs dirty? Clean the terminals and plugs before making connections.
Sound is only output from one speaker. Is the device connected properly? Connect the device to both the left and right input terminals.
Sound is interrupted or noise can be
heard.
Is there a contact problem with the connection cables? Reconnect the connection cables.
When connected via Bluetooth
Problem Check Remedy
Cannot connect or sound is interrupted
or noise can be heard.
Is there a device producing electromagnetic waves
in the 2.4 GHz band (microwave oven, wireless
LAN device, other Bluetooth device, etc.) nearby?
Either install the unit away from this device or stop using the other device
producing electromagnetic waves.
Is the distance from the Bluetooth device too far?
Or is there a wall or obstacle blocking the signal in
the space between?
Move this unit and the connected Bluetooth device close to each other. Or
change the position of the Bluetooth device or this unit.
Is an application other than a music playback
application running on the Bluetooth device?
Exit any application on the Bluetooth device other than the music playback
application.
Does the Bluetooth device you wish to connect
support A2DP?
Use a Bluetooth device that supports A2DP.
Has pairing with the Bluetooth device been per-
formed properly?
Turn the power of this unit and Bluetooth device off and back on, and then
perform pairing again.
English
Loading ...
Loading ...
Loading ...